User manual SONY DCR-PC1000E

[. . . ] Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Before operating the unit, please read this manual thoroughly, and retain it for future reference. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Your camcorder is supplied with two kinds of operations guides. [. . . ] (You cannot specify the number of printouts. You can print out pictures using a PictBridge compliant printer without connecting the camcorder to a computer. Connect the AC Adaptor to the Handycam Station to supply power from the wall socket. Insert the "Memory Stick Duo" on which still images are stored into your camcorder and insert your camcorder to the Handycam Station. To cancel Print mark, touch the image again to cancel Print mark in step 3. Do not mark images on your camcorder if the "Memory Stick Duo" already has some images with the Print mark put on using other devices. This may change the information of the images with the Print mark put on using the other device. When ["PictBridge PRINT" connecting] appears on the screen, touch . When connection is complete, (PictBridge connecting) appears on the screen. ] disappears and the image selection screen appears again. We cannot guarantee the operation of models that are not PictBridge compatible. Do not attempt the following operations when is on the screen. ­ Remove your camcorder from the Handycam Station. If the printer stops working, disconnect the USB cable (supplied), turn the printer off and on again and restart the operation from the beginning. If you print a still image recorded with a 16:9 ratio, left and right ends of the image may be cut off. Some printer models may not support the date printing function. We cannot guarantee the printing of images recorded with a device other than your camcorder. You can print still images without using a computer by connecting a printer directly to a digital video camera or digital still camera, regardless of model or manufacturer. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. When you are recording on a "Memory Stick Duo" with an external flash (optional) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. You cannot use an external flash (optional) and the built-in flash at the same time. [. . . ] Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to (CHG) OFF. The pre-installed rechargeable battery is always charged while your camcorder is connected to the wall socket via the AC Adaptor or while the battery pack is inserted. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all without the AC adaptor connected or the battery pack attached. However, even if the pre-installed rechargeable battery is not charged, the camcorder operation will not be affected as long as you are not recording the date. [. . . ]