User manual SONY DCR-PC100E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam, you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] (5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial. (6) Repeat steps 4 and 5 until you have selected all characters and completed the title. (7) To finish making your own titles, turn the SEL/PUSH EXEC dial to select [SET], then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title. If you take five minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to OFF once and then to CAMERA again, then complete your title. We recommend setting the playback or playback pause mode or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. Turn the SEL/PUSH EXEC dial to select [C], then press the dial. To enter a space If you use a tape with cassette memory, you can label a cassette. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labelled cassette and set the POWER switch to ON, the label is displayed for about five seconds. (6) Turn the SEL/PUSH EXEC dial to select the column of the desired character, then press the dial. (7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial. To enter a space To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you set the write-protect tab of the tape to lock You cannot label the tape. Slide the writeprotect tab to release the write protection. if you have superimposed titles in the cassette When the label is displayed , up to four titles also appear. When the "-----" indicator has fewer than 10 spaces The cassette memory is full. The "-----" indicates the number of characters you can select for the label. Turn the SEL/PUSH EXEC dial to select [C], then press the dial. [. . . ] This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. The intelligent accessory shoe supplies power to optional accessories such as a video light or microphone. The intelligent accessory shoe is linked to the POWER switch, allowing you to turn the power supplied by the shoe on and off. [. . . ]