User manual SONY DCR-PC101E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam. With your Handycam you can capture life's precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] (3) Press MENU, then select STILL SET in , then press EXEC (p. " FULL" appears on the screen, and you cannot record still images on this "Memory Stick. The number of still images in continuous shooting The number of still images you can shoot continuously varies depending on the image size and the capacity of the "Memory Stick. " During continuous recording of images The flash (optional) does not work. When shooting with the self-timer or the Remote Commander Your camcorder automatically records up to the maximum number of still images. If remaining capacity on the "Memory Stick" is less than for three images EXP BRKTG does not work. When selecting NORMAL Recording continues up to the maximum number of still images during pressing PHOTO deeper. You can record images on "Memory Stick"s with the self-timer. You can also use the Remote Commander for this operation. The self-timer starts counting down from 10 with a beep sound. In the last two seconds of the countdown, the beep sound gets faster, then recording starts automatically. You cannot cancel self-timer recording using the Remote Commander. Your camcorder can read moving picture data recorded on a tape and record it as a still image on a "Memory Stick. " Your camcorder can also take in moving picture data through the input connector and record it as a still image on a "Memory Stick. The picture recorded on the tape (2) Press is played back. (3) Keep pressing PHOTO lightly until the picture from the tape freezes. To change the still image, release PHOTO, select a still image again, and then press and hold PHOTO lightly. Image size of still images Image size is automatically set to 640 × 480. When the access lamp is lit or flashing Do not shake or strike the unit. As well do not turn the power off, eject a "Memory Stick" or remove the battery pack. Otherwise, the image data breakdown may occur. If " " appears on the screen The inserted "Memory Stick" is incompatible with your camcorder because its format does not conform with your camcorder. [. . . ] input/Output connectors S video input/output 4-pin mini DIN Luminance signal: 1 Vp-p , 75 (ohms) , unbalanced , sync negative Chrominance signal: 0. 3 Vp-p, 75 (ohms), unbalanced A/V (Audio/Video) input/output AV MINI JACK, input/output auto switch Video signal: 1 Vp-p, 75 (ohms), unbalanced, sync negative Audio signal: 327 mV, (at output impedance more than 47 k (kilohms) ) Input impedance with more than 47 k (kilohms) Output impedance with less than 2. 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using LCD: 3. ) 480 g (1 lb 0 oz) excluding the battery pack and cassette 580 g (1 lb 4 oz) including the battery pack, NP-FM50, cassette DVM60 and lens cap Supplied accessories See page 3. [. . . ]