User manual SONY DCR-PC107E

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362 (i. [. . . ] No safety problems will be caused by directly looking into the HOLOGRAM AF emitter at a close range. However, it is not recommended to do so, because you may experience such effects like several minutes of image residual and dazzling, that you encounter after looking into a flashlight. * HOLOGRAM AF satisfies Class 1(time base 30 , 000 seconds) , specified in all of JIS (Japan) , IEC(EU) , and FDA(US) industry standards. Complying with these standards ensures that the laser product is safe, under a condition that a human looks at the laser light either directly or even through a lens for 30, 000 seconds. notes · Attaching a conversion lens (optional) may obstruct the HOLOGRAM AF light and make focusing difficult. If enough light does not reach the subject even if the HOLOGRAM AF emitter emits light (recommended shooting distance is up to 2. 5 m (8 1/3 feet)), the subject will not be focused. The HOLOGRAM AF does not emit light in the following cases: ­ When the POWER switch is set to CAMERA. Your camcorder can read moving picture data recorded on a tape and record it as a still image on a "Memory Stick. " Image size is automatically set to 640 × 480. Before operation Insert a "Memory Stick" and the recorded tape into your camcorder. " · When the overlapping still image has a large amount of white, the thumbnail image of the picture may not be clear. 42), the picture on the LCD screen appears normally without being mirrorreversed. Image data modified with your computer You may not be able to play back the images modified with your computer on your camcorder. CHROM: two images (such as a background) 101-0019~101-0020 Sample images Sample images stored in the "Memory Stick" supplied with your camcorder are protected (p. (3) Press ­ (to see the previous image)/+ (to see the next image) on the right lower corner of the screen to select the still image that you want to superimpose. (5) Press ­/+ on the left lower corner of the screen to adjust the effect, then press OK to return to PAGE2. CHROM ­ The colour (blue) scheme of the area in the moving image which is to be swapped with a still picture ­ The colour (bright) scheme of the area in the still image which is to be swapped with a moving picture ­ The colour (blue) scheme of the area in the still image which is to be swapped with a moving picture ­ No adjustment necessary You can use M. Press ­/+ on the right lower corner before Step 5. During recording You cannot change the mode. To record still images as-is to the tape Press ­/+ on the left lower corner of the screen in the M. Before operation Insert the "Memory Stick" containing still images into your camcorder. [. . . ] If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. System Video recording system 2 rotary heads Helical scanning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal PAL colour, CCIR standards Usable cassette Mini DV cassette with the mark printed Tape speed SP: Approx. 8) 0 lx (lux) (in the NightShot mode)* * Objects unable to be seen due to the dark can be shot with infrared lighting. input/Output connectors S video input/output 4-pin mini DIN Luminance signal: 1 Vp-p , 75 (ohms) , unbalanced Chrominance signal: 0. [. . . ]