User manual SONY DCR-PC109E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The electromagnetic fields at the specific frequencies may influence the picture and sound of this camcorder. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] If you may take 5 minutes or longer to enter characters, set [A. Even though the power goes off, the characters you have entered remain stored in memory. Turn the power back on, then start again from step 1 to continue superimposing the title. z Tip · To change a created title, select the title in step 1, then touch characters again. 1 Select the title that you want to delete using / , then touch 2 Confirm the title is the one you want to erase, then touch [YES]. You can view the title when you play back the picture. Select to display the title when a scene superimposed with a title appears. Select when you do not want to display the title. You can label a cassette with Cassette Memory (up to 10 letters). The label will be displayed for approximately 5 seconds when you select the CAMERA-TAPE mode and insert a cassette, or when you select the PLAY/EDIT mode. To move s to select the next character, and enter the character in the same manner. 3 When you have finished entering characters, touch 4 Touch . To erase the label you have created, touch repeatedly to erase the characters, then touch . To change the label you have created, insert the cassette into your camcorder and go through the procedure from step 1. You can delete all data such as date, title, and cassette label saved in the Cassette Memory at one time. You can select the items listed below on the STANDARD SET menu. Vary depending on the power mode of your camcorder. The screen shows the items you can The use of Sony Excellence/Master mini DV cassette is recommended to get the most out of your camcorder. You cannot add sound on the tape recorded in the LP mode. If you record in the LP mode, a mosaic-like noise may appear or sound may be interrupted when you play back the tape on other camcorders or VCRs. When you mix recordings in the SP mode and in the LP mode on one tape, the playback picture may be distorted or the time code may not be written properly between the scenes. Select to record in the 16-bit mode (1 stereo sound with high quality). [. . . ] The value number indicates the amount of light from a subject coming into the lens. The Intelligent accessory shoe supplies power to optional accessories such as a video light, a flash or microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. 104) This jack works as an input jack for an external microphone as well as a powersupply jack for a plug-in-power microphone. [. . . ]