User manual SONY DCR-PC5E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Digital Handycamcamcorder. With your Digital Handycam, you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] If you make all the connections The audio input to be recorded will take precedence over others in the following order. LINK cable (DV connecting cable) is connected to your camcorder You cannot add a sound to a recorded tape. We recommend that you add new sound on a tape recorded with your camcorder If you add new sound on a tape recorded with another camcorder (including other DCR-PC4E/ PC5E), the sound quality may become worse. If you set the write-protect tab of the tape to lock You cannot record on a tape. Slide the writeprotect tab to release the write protection. To add new sound more precisely Press ZERO SET MEMORY at the point where you want to stop recording later in the playback mode. Recording automatically stops at the point where ZERO SET MEMORY was pressed. If you use a tape with cassette memory, you can superimpose the title while recording or after recording. When you play back the tape, the title is displayed for about 5 seconds from the point where you superimposed it. You can select one of eight preset titles and two custom titles (p. You can also select the colour, size and position of titles. (3) Select with r/R, and then press EXEC. (5) If necessary, change the colour, size, or position by pressing COLOUR, SIZE, POS r or POS R. In the playback, playback pause or recording mode: The "TITLE SAVE" indicator appears on the screen for about 5 seconds and the title is set. in the standby mode: The "TITLE" indicator appears. And when you press START/STOP to start recording, "TITLE SAVE" appears on the screen for about 5 seconds and the title is set. If you set the write-protect tab to lock You cannot superimpose or erase the title. Slide the write-protect tab to release the write protection. To use the custom title If you want to use the custom title, select step 3. if the tape has a blank portion You cannot superimpose a title on the tape. If the tape has a blank portion in the middle of the recorded parts The title may not be displayed correctly. the titles superimposed with your camcorder format · They are displayed by only the DV video equipment with index titler function. [. . . ] 7) 0 lux (in the NightShot mode)** ** Objects unable to be seen due to the dark can be shot with infrared lighting. input/Output connectors S video output 4-pin mini DIN Luminance signal: 1 Vp-p , 75 ohms , unbalanced , sync negative Chrominance signal: 0. 3 Vp-p, 75 ohms, unbalanced Audio/Video output AV MINI JACK Video signal: 1 Vp-p, 75 ohms, unbalanced, sync negative Audio signal: 327 mV, (at output impedance more than 47 kilohms) Output impedance with less than 2. 2 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using DCR-PC4E: LCD 3. [. . . ]