User manual SONY DCR-PC9E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] Repeat pressing a key to select the desired character on the key. (7) Press c to move the cursor for the next character. Repeat the same procedure as step 6 and 7 to complete your title. In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want to change, then press EXEC and then enter the new title as desired. If you take 5 minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to OFF (CHARGE) once and then to CAMERA again, then complete your title. We recommend setting the POWER switch to VCR (DCR-PC9E)/PLAYER (DCR-PC6E) or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. To enter the same character on the same button in succession Press c to move the cursor to the next position, and enter the character. If you use a tape with cassette memory, you can label a cassette. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and set the POWER switch to CAMERA or VCR (DCR-PC9E)/ PLAYER (DCR-PC6E), the label is displayed for about 5 seconds. (4) Press MENU, then select TAPE TITLE in in the menu setting, then press EXEC (p. Repeat pressing a key to select the desired character on the key. (6) Press c to move the cursor for the next character. Repeat the same procedure as step 5 and 6 to complete the label. To erase the label you have made To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you set the write-protect tab of the tape to lock You cannot label the tape. Slide the write-protect tab to release the write protection. If the tape has too many index signals You may not be able to label a cassette because the memory is full. In this case, delete data you do not need. if you have superimposed titles in the cassette When the label is displayed , up to 4 titles also appear. [. . . ] And 30 seconds When using the AC power adaptor: Approx. 7) 0 lx (lux) (in the NightShot mode)* * Objects unable to be seen due to the dark can be shot with infrared lighting. input/Output connectors S video input/output (DCR-PC9E) S video output (DCR-PC6E) 4-pin mini DIN Luminance signal: 1 Vp-p , 75 (ohms) , unbalanced , sync negative Chrominance signal: 0. 3 Vp-p, 75 (ohms), unbalanced Audio/Video input/output (DCRPC9E) Audio/video output (DCR-PC6E) AV MINI JACK, input/output auto switch Video signal: 1 Vp-p, 75 (ohms), unbalanced, sync negative Audio signal: 327 mV, (at output impedance more than 47 k (kilohms) ) Input impedance with more than 47 k (kilohms) Output impedance with less than 2. [. . . ]