User manual SONY DCR-SR100E

[. . . ] Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Before operating the unit, please read this manual thoroughly, and retain it for future reference. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters. [. . . ] If you record in the LP mode, the quality of scenes may be degraded, or scenes with quick movements may appear with a block noise when you play back the images. This setting is not suitable for recording conversations. The setting returns to [NORMAL] after you remove the power source for more than five minutes. You can display the direction from which the recording sound comes when recording in 5. The recorded image will not be affected even when you change the setting. You can select how a 16:9 (wide) aspect ratio image appears in the viewfinder. Expands the image vertically if black bands at the top and bottom in 16:9 (wide) aspect ratio are undesirable. You can select data transfer speed used to transfer data to your computer. When you use the AC Adaptor as the power source, [BRIGHT] is automatically selected for the setting. When you select [BRIGHT], battery life is slightly reduced during recording. You can check the information recorded automatically (data code) during playback. When you connect your camcorder to AC Adaptor, [BRIGHT] is automatically selected for the setting. When you select [BRIGHT], battery life is slightly reduced during recording. Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder. * You can operate with the zoom buttons on the LCD frame or on the Remote Commander. Displays the remaining hard disk free space for about eight seconds as described below. ­ When your camcorder recognizes the free hard disk space, with the POWER switch is set to (Movie) ­ When you press DISP/BATT INFO to switch the screen display from off to on, with the POWER switch is set to (Movie) ­ When the available free space of the hard disk remains less than five minutes for movies ­ When you start recording from the line input (For DCR-SR100E only) 3SteadyShot off 4Exposure 5White balance 6Gain 7Shutter speed 8Aperture value 9Exposure value The data code is displayed on the TV screen, if you connect your camcorder to a TV. The indicator toggles through the following sequences as you press DATA CODE on the Remote Commander: DATE/TIME t CAMERA DATA t OFF (no indication). The setting returns to [OFF] after you remove the power source for more than five minutes. Always displays the remaining hard disk free space indicator. The default setting is [ON] so that you can use the supplied Remote Commander (p. Set to [OFF] to prevent your camcorder from responding to a command sent by other device's remote control. [. . . ] The all-round audio reproduction is more realistic than stereo, which only reproduces movement of sound from side to side. The condition of a hard disk in which files are divided into pieces scattered around the hard disk. You can solve the condition by performing [HDD FORMAT] (p. Sound can be recorded in various formats, from 5. [. . . ]