User manual SONY DCR-SR200E

[. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] the operations may not be performed properly. ­ Operating the POWER switch ­ Removing your camcorder from the Handycam Station ­ Removing the USB cable (supplied) from the printer ­ Removing the USB cable (supplied) from the Handycam Station · If the printer stops working, remove the USB cable (supplied), turn the printer off and on again and restart the operation from the beginning. Depending on the type of printer you have, all four edges of an image may not be printed. Especially, the left and right ends of a 16:9 (wide) image may not be printed due to its aspect ratio. 1 Shoe cover (DCR-SR200E/SR60E/SR70E/SR80E) 2 Active Interface Shoe (DCR-SR200E/SR60E/SR70E/SR80E) The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. When you are recording with the external flash (optional), turn off the power of the external flash to prevent charging noise being recorded. When an external microphone (optional) is connected, it takes precedence over the internal microphone (p. What you can do with the camcorder by connecting to your computer If you install "ImageMixer for HDD Camcorder" in the supplied CD-ROM on your computer (p. 3 Set the camcorder onto the Handycam Station, then slide the POWER switch to turn on. 4 Connect the (USB) jack of the Handycam Station to your Macintosh using the supplied USB cable. Now you can access to the hard disk drive of the camcorder from your Macintosh. if a screen asking whether to format the hard disk drive appears , select [NO]. 6 Operate your Macintosh to copy image files from the camcorder. When you install the application, you can select other language (p. Music works, sound recording or other third party musical contents you may acquire from CDs, the Internet or other sources (the "Music Contents") are the copyrighted work of the respective owners thereof and are protected by copyright laws and other applicable laws of each country/region. Except to the extent expressly permitted by applicable laws, you are not permitted to use (including, without limitation, copying, modifying, reproducing, uploading, transmitting or placing to the external network accessible to the public, transferring, distributing, lending, licensing, selling and publishing) any of the Music Contents without obtaining authorization or approval of the respective owners thereof. License of ImageMixer for HDD Camcorder by Sony Corporation would not be construed as conferring to you by implication, estoppel or otherwise, any license or right to use the Music Contents. You can edit the copied images and burn them on a DVD using the compliant software. When you copy image files to a Macintosh, do not delete the files on the camcorder directly from the Macintosh. [. . . ] All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, TM and "®" are not mentioned in each case in this Handbook. 1 While pressing on the tab, inset your fingernail into the slit to pull out the battery case. 2 Place a new battery with the + side facing up. [. . . ]