User manual SONY HANDYCAM DCR-SR220 HOW TO SHOOT A GREAT WEDDING VIDEO.

[. . . ] To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Certain countries and regions may regulate disposal of the battery used to power this product. Please consult with your local authority. CAUTION The use of optical instruments with this product will increase eye hazard. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTICE ON THE SUPPLIED AC ADAPTOR FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. [. . . ] 0:02:05 RET. Using a disc in VR mode (DVD-RWs only) 2:40 [ ] : RETURN [EDIT] : END After selecting u using the multi-selector, adjust the dividing point with more precision. Note A slight difference may occur from the point where you press c/C and the actual dividing point, as your camcorder selects the dividing point based on halfsecond increments. 8 Use the multi-selector to select [EXEC. ]. The confirmation display appears. DIVIDE 0:02:05 DIVIDE? EXEC. [EDIT] : END 9 Use the multi-selector to select [EXEC. ] again. It returns to the Playlist edit display when the dividing is completed. To cancel dividing Press EDIT in any step from 3 to 8. 85 Selecting the playing order on your camcorder ­ Playlist Playing the Playlist Insert a Playlist-registered DVD-RW into your camcorder. 1 Set the mode dial to (Play/Edit). The Visual Index display appears. 001 1 1 04 1/2 18:00 2 Use the multi-selector to select (Playlist) tab. A thumbnail list of the scenes registered to the Playlist appears. Playlist tab 001 JA N 1 03 1/2 6 : 0 0 PM 3 Press N. On still images, they are displayed on the LCD screen for a while. It returns to the Visual Index display when all the registered scenes are played back. To start playback from a particular scene Use the multi-selector to select the scene. Playback starts from the selected scene. To display another scene during playback Press . />. To pause the scene Press X. To cancel playback Press x. 86 Editing the original data Original data stand for the actual recorded movies and still images data on the disc. You can edit the original data of DVD-RW recorded in VR mode. Editing the original data affects the actual recorded data. Dividing a movie Note that this operation actually divides the original recorded data on the disc. Insert a movie recorded DVD-RW into your camcorder. DELETE RET. 001 1 1 04 1/2 18:00 7 Use the multi-selector to select a scene. Repeat this step to select multiple movies or still images. EDIT EXEC. DELETE RET. 001 1 1 04 1/2 18:00 Pressing N starts playback of the selected scene. Press x to return to the display to select others. 8 Use the multi-selector to select [EXEC. ]. The confirmation display appears. EDIT DELETE DELETE? DEL. RET. 9 Use the multi-selector to select [EXEC. ]. The selected movies or still images are deleted from the disc. It returns to the item selection display when the deletion is completed. To delete all movies/still images in the folder at the same time Select [SELECT ALL] in step 6. To cancel the deletion Press EDIT in any step from 3 to 8. Tip To delete all the movies and still images on the disc, perform formatting (page 74). 90 -- Viewing/duplicating discs/editing the recordings on your computer (DCR-DVD101E/DVD201E only) -- Connecting your camcorder to your computer ­ Introduction A USB driver and application software installation is required to connect your camcorder to your computer. The USB driver along with the application software required for editing scenes can be found on the CD-ROM supplied with your computer. You can enjoy the following with your camcorder by connecting the camcorder to your computer using the USB cable: ·Copying recorded scenes to your computer ·Viewing scenes on your computer ·Editing scenes copied to your computer ·Duplicating a disc ·Making an original DVD using recorded scenes stored on your computer. Notes ·Scenes may not be transferred correctly depending on your computer. [. . . ] 43 W, X, Y, Z Warning indicators . . . . . . . . . . . . . . . 127 White balance . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Wide-angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Wide mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]