User manual SONY HANDYCAM DCR-SR68/L DATASHEET

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. [. . . ] · The sound fields for music and movie do not work in the following cases. ­ signals with a sampling frequency of more than 48 kHz is input. · When multi channel Linear PCM signals are received via an HDMI IN jack, "A. F. D. AUTO" will be selected automatically. · When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "LARGE" on the SPEAKER menu. However, the sound will be output from the subwoofer if ­ the digital input signal contains LFE signals. ­ the front and surround speakers are set to "SMALL". ­ the sound field for movie is selected. Tips · You can identify the encoding format of DVD software, etc. , by looking at the logo on the package. · Sound fields with DCS marks use DCS technology. For details on Digital Cinema Sound (DCS), see "Glossary" (page 67). x SPORTS (Sports) Reproduces the feeling of sports broadcasting. x PORTABLE (Portable Audio Enhancer) Reproduces a clear enhanced sound image from your portable audio device. Note Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component. Preparing for the "BRAVIA" Sync The receiver is compatible with the "Control for HDMI-Easy Setting" function. · If your TV is compatible with the "Control for HDMI-Easy Setting" function, you can set the receiver and playback components Control for HDMI function automatically by setting the TV (page 47). · If your TV is not compatible with the "Control for HDMI-Easy Setting" function, set the Control for HDMI function of the receiver, playback components and TV individually (page 48). If your TV is compatible with the "Control for HDMI-Easy Setting" function The Control for HDMI function of the receiver can be turned on simultaneously by turning on the Control for HDMI function of the TV. "BRAVIA" Sync Features 1 Connect the receiver, TV and playback components via HDMI connection (page 23). (The respective components must be compatible with the Control for HDMI function. ) 2 Turn on the receiver, TV and playback components. 3 Turn on the Control for HDMI function of the TV. The Control for HDMI function of the receiver and all the connected components are turned on simultaneously. When the setup is completed, "COMPLETE" will appear. For details on setting the TV, refer to the operating instructions supplied with the TV. continued 47GB If your TV is not compatible with the "Control for HDMI-Easy Setting" function AMP MENU , V/v/B/b O Playing back components with one-touch operation (One-Touch Play) By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/image from connected components. When you set "PASS. THRU" to "AUTO" or "ON", sound and image can be output only from the TV while the receiver remains in standby mode. [. . . ] · If you cannot listen to the sound of a component connected to the receiver ­ Select appropriate input (BD, DVD, SAT/CATV) when you want to watch a program on a component connected via HDMI connection to the receiver. ­ Change the TV channel when you want to watch a TV broadcast. ­ Select the component or input you want to watch when you watch a program on the component connected to the TV. Refer to the operating instructions of the TV on this operation. [. . . ]