User manual SONY HANDYCAM DCR-SX45/B HANDYCAM HANDBOOK

[. . . ] Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Note on power cord plug shapes (Saudi Arabian model only) For AC 220 V wall sockets Make sure that the 13 A 3-pin plug (Type BF) is securely attached to the power cord. (The 13 A 3-pin plug is attached when shipped from the factory. ) For AC 127 V wall sockets 1 Remove the 13 A 3-pin plug using a screwdriver. RISK OF ELECTRIC SHOCK DO NOT OPEN No operator serviceable parts inside. [. . . ] If the TV is not compatible with the Control for HDMI - Easy Setting function, set the Control for HDMI function of the system and TV manually. Note · Displayed items vary depending on the country model. 1 2 3 4 Make sure that the system and the TV are connected with an HDMI cable. Turn on the TV and press [/1 to turn on the system. Switch the input selector on your TV so that the signal from the system through the HDMI input appears on the TV screen. Set the Control for HDMI function of the system and TV. BRAVIA Sync For details of the setting of the system, see the following Steps. For details of the setting of the TV, refer to the operating instructions of the TV (depending on the TV, the default setting of the Control for HDMI function is set to off). 68GB To set the [CONTROL FOR HDMI] function to on/off 1 2 Press FUNCTION +/­ repeatedly until "DVD" appears in the front panel display. Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 3 4 5 6 7 The One-Touch Play also works when: ­ You press A while the disc tray is opened and H appears in the front panel display. ­ You close the disc tray by pressing the disc tray. ­ You press DVD TOP MENU/DVD MENU and H appears in the front panel display. ­ You select the "DVD" function by pressing FUNCTION +/­ and H appears in the front panel display. Note Press X/x to select then press . [SETUP], · One-Touch Play does not work when you press H. The options for [SETUP] appear. Press X/x to select [CUSTOM], then press . Control for HDMI/External Audio Device The system and TV work as follows (e. g. ): This system TV The Setup Display appears. Press X/x to select [HDMI SETUP], then press . The options for [HDMI SETUP] appear. Press X/x to select [CONTROL FOR HDMI], then press . Press X/x to select the setting, then press . Turns on. (If not already turned on. ) r Switches to "DVD" function. · If you select a TV program during DVD playback with the system, the "TV/VIDEO" function is automatically set to output TV sound. · When you activate One-Touch Play during watching TV, the System Audio Control function is activated and the TV sound is muted. 70GB Playing Back Audio Files/JPEG Image Files of a USB Device You can play audio files (MP3/WMA/AAC files)/JPEG image files stored in a USB device such as the digital music player or USB storage media (not supplied) by connecting the USB device to the unit. For a list of USB devices that can be connected to the unit, see "Playable USB Devices" (supplement). The audio format that can be played back by the system is MP3/WMA/AAC files* only. * Files with copyright protection (Digital Rights Management) cannot be played by the system. Note Note · When you use the AUDIO IN/A. CAL MIC jack while a USB device is connected, be careful as space is restricted. 1 2 Press FUNCTION +/­ repeatedly until "USB" appears in the front panel display. Connect a USB device (digital music player or USB storage media) to the (USB) port. When you connect the USB device, "READING" appears in the front panel display until the system reads all data of the USB device. Note Control for HDMI/External Audio Device · The system cannot play WMA/AAC files on a DATA CD/DATA DVD. About playable USB devices · Do not use USB devices other than those listed in "Playable USB Devices" (supplement). Operation of models not listed is not guaranteed. · Operation is not guaranteed, even when using these USB devices. · Some of these USB devices may not be available for purchase in certain areas. · When you connect the USB device, make sure that the direction of the jack is correct. · Do not forcibly insert the USB device, as this may cause the device to be damaged. · Do not connect other device or objects besides the USB device. · It may take about 10 seconds before "READING" appears in the front panel display depending on the type of the USB device. To remove the USB device 1 2 3 Press x to stop playback. [. . . ] To ensure that the subtle nuances of these highquality media are transmitted with no deterioration, Sony has developed a technology called "S-AIR" for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZWRT10/EZW-T100. This technology transfers digital audio signals with no compression using the 2. 4 GHz band range of ISM band (Industrial, Scientific, and Medical band), such as wireless LANs and Bluetooth applications. Super Audio CD A Super Audio CD layer consists of the 2 channel area or the multi-channel area. · 2 channel area: An area in which 2 channel stereo tracks are recorded · Multi-channel area: An area in which multichannel (up to 5. 1 channels) tracks are recorded 2 channel area4) Super Audio CD is a new high-quality audio disc standard where music is recorded in the DSD (Direct Stream Digital) format (conventional CD is recorded in the PCM format). The DSD format, using a sampling frequency 64 times higher than that of a conventional CD, and with 1-bit quantization, achieves both a wide frequency range and a wide dynamic range across the audible frequency range, and so provides music reproduction extremely faithful to the original sound. x Super Audio CD types Multi channel area4) Super Audio CD layer 1) You can play the CD layer on a conventional CD player. [. . . ]