User manual SONY HANDYCAM DCR-SX85

[. . . ] The AC power cord must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. FCC WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. [. . . ] RGB Outputs RGB video signals. Video HDMI Deep Color Output Settings and Adjustments Auto 12bit 10bit Off Normally select this. Outputs 12bit/10bit video signals when the connected TV is compatible with Deep Color. Select this when the picture is unstable or colors appear unnatural. Output Video Format HDMI Normally select "Auto. " Select "Original Resolution" to output the resolution recorded on the disc. When the resolution is lower than the SD resolution, it is scaled up to the SD resolution. Select the resolution that suits your TV. Automatically sets the lowest resolution. Component Video Video Pause Mode Auto Normally select this. Dynamic moving pictures appear without blurring. Displays static pictures at high resolution. z · When connecting the HDMI OUT jack and other video output jacks at the same time, select "Component Video. " · If no picture appears when setting "HDMI" or "Component Video" resolution, try another resolution setting. Frame BD/DVD-ROM 1080/24p Output Auto Outputs 1920 × 1080p/ 24 Hz video signals only when connecting a 1080/ 24p-compatible TV using the HDMI OUT jack. Select this when your TV is not compatible with 1080/ 24p video signals. Off 23 DTS Neo:6 Audio Settings Audio (HDMI) Auto Normally select this. Outputs audio signals according to the status of the connected HDMI device. Outputs PCM signals from the HDMI OUT jack. Cinema Performs "DTS Neo:6 Cinema" mode decoding. Enter the code for your language by referring to "Language code list" (page 38). Parental Control Settings Password Sets or changes the password for the Parental Control function. A password allows you to set a restriction on BD-ROM or DVD VIDEO, and Internet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs, DVD VIDEOs, and Internet videos. Settings and Adjustments Audio Selects the default track language for BDROMs or DVD VIDEOs. When you select "Original, " the language given priority in the disc is selected. When you select "Select Language Code, " the display for entering the language code appears. Enter the code for your language by referring to "Language code list" (page 38). Parental Control Area Code Playback of some BD-ROMs, DVD VIDEOs, or Internet videos can be limited according to the geographic area. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password. BD Parental Control Subtitle Selects the default subtitle language for BDROMs or DVD VIDEOs. When you select "Select Language Code, " the display for entering the language code appears. Enter the code for your language by referring to "Language code list" (page 38). Playback of some BD-ROMs can be limited according to the age of the users. [. . . ] · "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of Blu-ray Disc Association. · "x. v. Color" and "x. v. Color" logo are trademarks of Sony Corporation. · "BRAVIA" is a trademark of Sony Corporation. · "PhotoTV HD" and the "PhotoTV HD" logo are trademarks of Sony Corporation. [. . . ]