User manual SONY DCR-TRV110

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] The zero set memory function may not work when there is a blank portion between pictures on a tape. You can automatically search for the point where the recording date changes and start playback from that point (Date search). Use the Remote Commander for this operation. Use this function to check where recording dates change or to edit the tape at each recording date. (2) Press SEARCH MODE on the Remote Commander repeatedly, until the date search indicator appears. The indicator changes as follows: DATE SEARCH n PHOTO SEARCH n PHOTO SCAN n no indicator (3) When the current position is [b], press = to search towards [a] or press + to search towards [c]. Your camcorder automatically starts playback at the point where the date changes. Each time you press = or +, the camcorder searches for the previous or next date. The date search works only for tapes recorded in the Digital8 system. If one day's recording is less than one minute, your camcorder may not accurately find the point where the recording date changes. If a tape has a blank portion in the recorded portions The date search function will not work correctly. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (3) Play back the recorded tape on your camcorder. When you have finished dubbing a tape press p on both your camcorder and the VCR. Note on tapes that are not recorded in the Digital8 system The picture may fluctuate. During playback of tapes recorded in the Hi8/ standard 8 system Digital signals are output as the image signals from the DV OUT jack. You can connect one VCR only using the i. During digital editting You cannot use DIGITAL EFFECT button functions. Using the flash memory function ­ introduction DCR-TRV510E only Your camcorder has a built-in flash memory with a capacity of 2MB. The built-in flash memory can record still images, exchange still image data with tapes and play back and delete the still image data. If you use the supplied accessories, you can input still image data to your PC. This chapter explains the functions that are available using the built-in flash memory. [. . . ] 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using LCD DCR-TRV110: 4. 3 W Design and specifications are subject to change without notice. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. 35, 38, 67) p STOP (stop) 0 REW (rewind) ( PLAY (playback) ) FF (fastforward) P PAUSE (pause) The control buttons light up when you set the POWER switch to PLAYER. [. . . ]