User manual SONY DCR-TRV14E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam. With your Handycam you can capture life's precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] " You can use Memory Overlap only when the POWER switch is set to CAMERA. CHROM: 2 images (such as a background) 101-0019~101-0020 Sample images Sample images stored in the "Memory Stick" supplied with your camcorder are protected (p. You cannot use MEMORY MIX for moving pictures recorded on the "Memory Stick. " · When the overlapping still image has a large amount of white, the thumbnail image of the picture may not be clear. Image data modified on a computer You may not be able to play back modified images with your camcorder. The image recorded on the "Memory Stick" appears in the lower right corner of the screen. (3) Press ­ (to see the previous image)/+ (to see the next image) in the lower right corner of the screen to select the still image that you want to superimpose. (5) Press ­/+ in the lower left corner of the screen to adjust the effect, then press OK to return to PAGE2. CHROM The colour (blue) scheme of the area in the still image which is to be swapped with a moving picture M. LUMI The colour (bright) scheme of the area in the still image which is to be swapped with a moving picture C. CHROM The colour (blue) scheme of the area in the moving picture which is to be swapped with a still image M. OVERLAP No adjustment necessary (You can select M. Press ­/+ in the lower right corner before step 5. To record still image as they appear on the tape Select M. LUMI, then press ­/+ in the lower left corner of the screen so that the right end of the bar is visible. Before operation Insert the "Memory Stick" containing the still images into your camcorder. Image size of still images Image size is automatically set to 640 × 480. To record still image as they appear on the tape Select M. LUMI, then press ­/+ in the lower left corner of the screen so that the right end of the bar is visible. You can carry out a time-lapse recording by setting the camcorder to automatically record still images. The INTERVAL MEM STILL indicator lights up on the screen during Interval Photo Recording. The picture and sound are recorded up to the full capacity of the "Memory Stick" (MPEG MOVIE EX). [. . . ] 4 V (AC Adaptor) Average power consumption (when using the battery pack) DCR-TRV12E/TRV14E/TRV19E/ TRV22E: 3. ) Main unit only DCR-TRV12E/TRV14E/TRV19E: 520 g (1 lb 2 oz) DCR-TRV22E: 530 g (1 lb 2 oz) DCR-TRV33E: 540 g (1 lb 2 oz) Including the rechargeable battery pack NP-FM30, cassette DVM60 and lens cap DCR-TRV12E/TRV14E/TRV19E: 610 g (1 lb 5 oz) DCR-TRV22E: 620 g (1 lb 5 oz) DCR-TRV33E: 630 g (1 lb 5 oz) Supplied accessories See page 3. Memory Flash memory 8MB: MSA-8A Operating voltage 2. 14 oz) Design and specifications are subject to change without notice. [. . . ]