User manual SONY DCR-TRV210E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] Use the Remote Commander for this operation. (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b]. The zero set memory function works only for tapes recorded in the Digital8 system. The picture and the sound may be distorted at the end of the inserted section when it is played back. If you re-record on the section which contains a non-recorded section The zero set memory function may not work correctly. Or 5SEC When START/STOP MODE is set to You cannot use the zero set memory function. Playing back a tape with picture effects During playback, you can process a scene using the picture effect functions: NEG. During playback, press PICTURE EFFECT and turn the SEL/PUSH EXEC dial until the desired picture effect indicator (NEG. The picture effect function works only for tapes recorded in the Digital8 system. You cannot externally input scenes using the picture effect function. To record pictures that you have processed using the picture effect function, record the pictures on the VCR . Pictures processed by the picture effect function Pictuers processed by the picture effect function are not output through the DV OUT jack. When you set the POWER switch to OFF or stop playing back The picture effect function is automatically canceled. Playing back a tape with digital effects During playback, you can process a scene using the digital effect functions: STILL, FLASH, LUMI. (1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. Mode, the picture where you press the SEL/PUSH EXEC dial is stored in memory as a still picture. Playing back a tape with digital effects You cannot process externally input scenes using the digital effect function. To record pictures that you have processed using the digital effect function, record the pictures on the VCR . Picture processed by the digital effect function Pictures processed by the digital effect function are not output through the DV OUT jack. When you set the POWER switch to OFF or stop playing back The digital effect function is automatically canceled. Quickly locating a scene using the zero set memory function Your camcorder goes forward or backward to automatically stop at a desired scene having a tape counter value of "0:00:00". Use the Remote Commander for this operation. [. . . ] 32, 35, 64) p STOP (stop) 0 REW (rewind) ( PLAY (playback) ) FF (fastforward) P PAUSE (pause) The control buttons light up when you set the POWER switch to PLAYER. Tripod receptacle (base) Make sure that the length of the tripod screw is less than 6. Otherwise, you cannot attach the tripod securely and the screw may damage your camcorder. The LASER LINK system sends and receives pictures and sound between video equipment having the mark by using infrared rays. [. . . ]