User manual SONY DCR-TRV315

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. ) (1) Insert a blank tape (or a tape you want to record over) into your camcorder, and insert the recorded tape into the VCR. (3) Press z REC and the button on its right simultaneously on your camcorder, then immediately press X on your camcorder. (4) Press N on the VCR to start playback. The picture from a TV or VCR appears on the screen of your camcorder. (5) Press X on your camcorder at the scene where you want to start recording from. When you have finished dubbing a tape You can connect one VCR only using the i. During digital editing The colour of the display may be uneven. However this does not affect the dubbed picture. If you record playback pause picture with the DV IN/OUT jack The recorded picture becomes rough. 29) -- To record a 16:9 wide picture (p. 52) To compensate for camera-shake To cancel the SteadyShot function. Natural pictures are produced when shooting a stationary object with a tripod. to use the NightShot Light function (p. 33) To cancel the NightShot Light function To fire the flash (optional) regardless of the brightness of the surroundings The flash fires automatically To fire the flash before recording to reduce the red-eye phenomenon Makes the flash level higher than normal Normal setting Makes the flash level lower than normal CAMERA MEMORY CAMERA MEMORY If you cancel the SteadyShot function The SteadyShot off indicator appears on the screen. You cannot adjust FLASH MODE or FLASH LVL if the flash (optional) is not compatible with FLASH MODE or FLASH LVL. FLASH MODE and FLASH LVL are displayed only when an external flash (optional) is connected to the intelligent accessory shoe. Icon/item HiFi SOUND Mode z STEREO 1 2 TBC* z ON OFF Meaning To play back a stereo tape or dual sound track tape with main and sub sound To play back a stereo tape with the left sound or a dual sound track tape with main sound To play back a stereo tape with the right sound or a dual sound track tape with sub sound To correct jitter To not correct jitter. Set TBC to OFF when playing back a tape on which you have dubbed over and recorded the signal of a TV game or similar machine. To reduce picture noise To reduce a conspicuous afterimage when the picture has a lot of movement To adjust the balance between the stereo 1 and stereo 2 PLAYER/VCR PLAYER/VCR PLAYER/VCR POWER switch PLAYER/VCR To palyback a tape recorded on your camcorder on a PAL system TV To palyback a tape recorded in the NTSC colour system on a TV with the NTSC 4. 43 mode To automatically select the system (Hi8/ standard 8 or Digital8 ) that was used to record on the tape, and play back the tape To play back a tape that was recorded in the Hi8/standard 8 system when your camcorder does not automatically distinguish the recording system To convert digital video signals into analog video signals via your camcorder. [. . . ] If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. System Video recording system 2 rotary heads Helical scaning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal PAL colour, CCIR standards Recommended cassette Hi8/Digital8 video cassette Recording/playback time (using 90 min. Hi8 video cassette) SP mode: 1 hour LP mode: 1 hour and 30 minuites Fastforward/rewind time (using 90 min. [. . . ]