User manual SONY DCR-TRV350

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] *1) CCD-TRV107E/TRV208E/TRV408E, DCR-TRV350 only *2) DCR-TRV350 only When you have finished dubbing a tape You can edit on VCRs that support the following systems: 8 mm , Hi8 , VHS , S-VHS , VHSC , S-VHSC , Betamax , mini DV , DV or Digital8 If your VCR is a monaural type (DCR-TRV350 only) Connect the yellow plug of the A/V connecting cable to the video input jack and the white or the red plug to the audio input jack on the TV. If you connect the white plug, the sound is L (left) signal. If you connect the red plug, the sound is R (right) signal. If your VCR is a stereo type (CCD-TRV107E/ TRV108E/TRV208E/TRV408E only) Connect the audio plug of the A/V connecting cable supplied to the left (white) input jack of your VCR. If your VCR has an S video jack Connect using an S video cable (optional) to obtain optimum quality screen images. With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR for more information. (4) Play back the recorded tape on your camcorder. When finished, the indicator changes to COMPLETE. When the VCR does not operate correctly · Place your camcorder at least 30 cm (12 in. You can select title, colour, size, and background colour. CUSTOM1 and CUSTOM2 are custom titles stored in your camcorder as instructed in "Making your own titles" (p. 1 Turn the SEL/PUSH EXEC dial to select the colour, size, or background colour, then press the dial. 3 Repeat steps 1 and 2 until the title is laid out as desired. 4 Press the SEL/PUSH EXEC dial again to complete the setting. Note You can put a title only into the tape of the VCR. You can choose either normal recording (NORMAL) or interval recording (PREVIEW). ­ NORMAL: you can record into the VCR normally. ­ PREVIEW: you can make a time-lapse dubbing by setting the camcorder to automatically play back and stand by sequentially. [. . . ] To avoid possible damage from battery leakage or corrosion, observe the following: ­ Be sure to insert the batteries with the + ­ polarities matched to the + ­ marks. ­ Do not use a combination of new and old batteries. ­ Do not use different types of batteries. ­ Current drains from batteries when you are not using them for a long time. [. . . ]