User manual SONY DCR-TRV360

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] when you release PUSH AUTO , manual focusing resumes. Shooting in relatively dark places or shooting fast-moving subjects in relatively bright places Shoot at the "W" (wide-angle) position after focusing at the "T" (telephoto) position. When you shoot close to the subject Focus at the end of the "W" (wide-angle) position. The following indicators may appear when recording a distant subject. When the subject is too close to focus on. You can insert a scene in the middle of a recorded tape by setting the start and end points. the previously recorded frames between these start and end points will be erased. Use the Remote Commander for this operation. (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b]. The zero set memory function works only for tapes recorded in the Digital8 system. The picture and the sound may be distorted at the end of the inserted section when it is played back. There may be a discrepancy of several seconds from the time code. The zero set memory function may not work when there is a blank portion between pictures on a tape. You can automatically search for the point where the recording date changes and start playback from that point (Date search). Use the Remote Commander for this operation. Use this function to check where recording dates change or to edit the tape at each recording date. (2) Press SEARCH MODE on the Remote Commander repeatedly, until the date search indicator appears. The indicator changes as follows: DATE SEARCH n PHOTO SEARCH n PHOTO SCAN n no indicator (3) When the current position is [b], press = to search towards [a] or press + to search towards [c]. Your camcorder automatically starts playback at the point where the date changes. Each time you press = or +, the camcorder searches for the previous or next date. The date search works only for tapes recorded in the Digital8 system. If one day's recording is less than one minute, your camcorder may not accurately find the point where the recording date changes. [. . . ] 4 V (AC power adaptor) Average power consumption (when using the battery pack) During camera recording using LCD 3. ) 890g (1 lb 15 oz) excluding the battery pack, lithium battery, cassette and shoulder strap 1 kg (2 lb 3 oz) including the battery pack NP-F330, lithium battery CR2025, 90min. 2 feet) Design and specifications are subject to change without notice. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. [. . . ]