User manual SONY DCR-TRV480E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The electromagnetic fields at the specific frequencies may influence the picture and sound of this camcorder. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] GOFF DATE/TIME CAMERA DATA Select not to display date, time and the camera settings data during playback. After you select the CAMERA-TAPE mode with the cassette inserted, and your camcorder calculates the remaining amount of tape. GON OFF Select when using the Remote Commander supplied with your camcorder. Select to deactivate the Remote Commander to prevent your camcorder from responding to a command sent by another VCR remote control unit. The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. GON OFF Select to turn on the camera recording lamp on the front of your camcorder during recording. Select this setting in the following recording situations. The camera recording lamp will not light up during recording. When you do not want the subject to be nervous about being recorded. When you are recording close to the subject. When the subject reflects the recording lamp. GMELODY NORMAL OFF Select to sound a melody when you start/stop recording, operate the touch panel, or when an unusual condition occurs on your camcorder. Select to sound a beep instead of the melody. Select to cancel the melody, the beep sound, the shutter sound or touch panel operation confirmation beep. You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while [V-OUT/PANEL] is selected. You can select the scrolling direction (up or down) of the menu items on the LCD screen when you touch or . When approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off to prevent the battery from becoming consumed. When you connect your camcorder to the wall socket, [A. You can select items listed below on the TIME/ LANGU. The settings you can adjust vary depending on the power mode of your camcorder. the Screen shows the items you can currently operate. You can adjust the time difference when using your camcorder abroad. [. . . ] ­ Leaving the casing in contact with rubber or vinyl objects for a long period of time. Wipe the surface of the lens clean with a soft cloth in the following instances: ­ When there are fingerprints on the lens surface. Store in a well-ventilated location subject to little dirt or dust. Files in this format can have additional information such as your camcorder's setting information at the time of recording. [. . . ]