User manual SONY DCR-TRV510E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam you can capture life's precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] You can also search for still pictures one after another and display each picture for five seconds automatically (photo scan). Use the Remote Commander for these operations. (2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears. the indicator changes as follows: DATE SEARCH n PHOTO SEARCH n PHOTO SCAN n no indicator (3) Press = or + to select the photo for playback. Each time you press = or +, the camcorder searches for the previous or next photo. Your camcorder automatically starts playback from the photo. If a tape has a blank portion in the recorded portions The photo search function may not work correctly. Each photo is played back for about 5 seconds automatically. Note The photo search and photo scan work only for tapes recorded in the Digital8 system. Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. set the input selector on the VCR to LINE , if available. (1)Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (3) Play back the recorded tape on your camcorder. When you have finished dubbing a tape If you have displayed the screen indicators on the TV Make the indicators disappear by pressing SEARCH MODE on the Remote Commander, DISPLAY or DATA CODE so that they will not be superimposed on the edited tape. You can edit on VCRs that support the following systems h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC, l Betamax, mini DV or Digital8 DV, If your VCR is a monaural type Connect the yellow plug for video and the white plug for audio on both your camcorder and the VCR. You do not need to connect the red plug. With this connection, the sound will be monaural. Connect using an S video cable (not supplied) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. connect an S video cable (not supplied) to the S video jacks of both your camcorder and the VCR. To perform a more precise editing Connect a LANC cable (not supplied) to your camcorder and other video equipment having fine synchro-editing function. With digitalto-digital connection, video and audio signals are transmitted in digital form for high-quality editing. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. [. . . ] 143) @¶ Tripod receptacle (base) Make sure that the length of the tripod screw is less than 6. Otherwise, you cannot attach the tripod securely and the screw may damage your camcorder. The LASER LINK system sends and receives pictures and sound between video equipment having the mark by using infrared rays. The intelligent accessory shoe supplies power to optional accessories such as a video light or microphone. [. . . ]