User manual SONY DCR-TRV9E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label is displayed on the LCD screen, in the viewfinder, or on the TV screen. (5) Turn the CONTROL dial to select the column of the desired character, then press the CONTROL dial. (6) Turn the CONTROL dial to select the desired character, then press the CONTROL dial. In step 5 turn the CONTROL dial to select [ M ], then press the CONTROL dial. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If the mark appears in step 4 The cassette memory is full. If you erase the title in the cassette, you can label it. if you have superimposed titles in the cassette When the label is displayed , up to 4 titles also appear. Note on "-----" indicator displayed on the LCD screen or in the viewfinder The "-----" indicates the number of characters you can select for the label. When the "-----" indicator has fewer than 10 spaces, the cassette memory is full. Note on the cassettes If you use a cassette tape set to prevent accidental erasure, you cannot label it. Slide the protect tab so that the red portion is not visible. This indicates that the SteadyShot function is working and the camcorder compensates for camera-shake. You can release the SteadyShot function when you do not need to use the SteadyShot function. Do not use the SteadyShot function when shooting a stationary object with a tripod. Select ON in step 3, then press the CONTROL dial. When you switch the SteadyShot function on or off, the exposure may fluctuate. When the SteadyShot function is released, the indicator does not appear. If you use a tele conversion lens (not supplied) or a wide conversion lens (not supplied), the SteadyShot function may not work. Connect the camcorder to your VCR or TV to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use mains for the power source. [. . . ] Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder. LINK" mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE 1394-1995 specifications and their revisions. To use the Remote Commander, you must insert two R6 (size AA) batteries. (2) Insert both of the R6 (size AA) batteries with correct polarity. [. . . ]