User manual SONY DDM-2810CSU

[. . . ] Before operating the unit, please read this manual thoroughly and retain it for future reference. The model and serial numbers are located at the rear of the unit. [. . . ] This unit cannot be operated as a normal TV receiver/ monitor. The extremely high resolution of 2, 048 dots (horizontal) × 2, 048 lines (vertical) per frame has been made possible through the development of a 300 MHz band width video amplifier. each model is operated on AC 90 to 132 V and 180 to 264 V. Operate the unit on the correct power supply. Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. Unplug the unit from the wall outlet if it is not to be used for a long period of time. The 32-inch Trinitron picture tube with an aspect ratio 1:1 presents a square picture. Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc. ) or near materials (curtains) which might block the ventilation holes. Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, moisture, mechanical vibration, or shock. Do not throw away the carton and packing materials. [. . . ] 3 ns or less Maximum brightness More than 80 cd/m2 (at screen center) Geometric distortion Within the area of a circle whose radius equals 1% of the picture height at all area of the pictrue. 95 kg (210 lb) Optional accessaries Remote controller DDM-RM10 Landing sensor DDM-LS10 Design and specifications are subject to change without notice. [. . . ]