User manual SONY DE451

[. . . ] 3-867-525-11 (1) To Press ^ ^ zOther Operations Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, INTRO PGM, shuffle or RMS (Random Music Sensor) play modes. Repeat all the tracks or only one track. Playing a CD right away! Compact Disc Compact Player Operating Instructions About area code The area code of the player you purchased is shown on upper left of the bar code label on the package. For accessories supplied with your player, check the area code of your model and refer to "Supplied accessories" toward the end of this manual. Pause (main unit only) Resume play after pause (main unit only) Find the beginning of the current track (AMS*) Find the beginning of previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning of succeeding tracks (AMS) Go forward quickly Go backwards quickly Playing tracks in random order (Shuffle Play) You can play the tracks in a CD in random order. PLAY MODE Using other functions To minimize skipping (ESP2) The ESP (Electronic Shock Protection) function minimize skipping by using a buffer memory that stores music data and plays it back in the event of a shock. The new ESP2 (ESP Squared) system uses a new DSP (Digital Signal Processor) which can read and store music data more efficiently, providing a level of continuous skip protection not found in traditional buffer memory units. [. . . ] During RMS play: Press PLAY MODE repeatedly until "RMS" flashes, then press REPEAT/ ENTER. Each time you press REPEAT/ENTER, the track number and the playing order appear in the order you specified. Note Continue to the reverse side m 2 Adjust the volume. To stop play, press p. 2 Adjust the volume. Not these ways To cancel INTRO PGM play, press PLAY MODE repeatedly until the play mode indication disappears from the display. · If you program another track after the 22nd track, the first track programed is cleared and the new track is programed instead. To protect your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Notes · When you use a connecting cord, the SOUND function will be disabled. · Before you play the CD, turn down the volume of the connected equipment so as not to damage the connected speakers. · The beep sound is not output from the LINE OUT jack. · When you connect other equipment to the LINE OUT jack of this player, adjust the volume on the connected equipment. · When you record a CD on a cassette tape using a tape recorder that has the blank search function, release the ESP function. If the ESP function is on, the blank search function does not work. zPower Sources Using rechargeable battery Charge the rechargeable battery before using it for the first time. Use only BP-DM10 or BP-DM20 rechargeable battery for this player. Do not use any other rechargeable batteries. You can use BP-DM10 and BP-DM20 in the same way, but their charging time and battery life are different. Check the model number of your rechargeable battery before using it. Using dry batteries zAdditional Information Precautions On safety · Should any solid objects or liquid fall into the unit, unplug it and have it checked by qualified personnel before operating it any further. · Do not put any foreign objects in the DC IN 4. 5 V (external power input) jack. (rear) Optional accessories Maintenance To clean the casing Use a soft cloth slightly moistened in water or a mild detergent solution. Do not use alcohol, benzine or thinner. Specifications CD player System Compact disc digital audio system Laser diode properties Material: GaAlAs Wavelength: = 780 nm Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. The resume play function, however, let you listen to from the point where you last turned off the player. Insert the rechargeable battery so that the word "SONY" is facing the same direction as illustrated inside the lid, and close the lid. Note · Do not use manganese batteries for this player. · To unplug the AC power adaptor from the wall outlet, grasp the adaptor itself, do not pull its cord. Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information about the accessories in your country. General Power requirements For the area code of the model you purchased, check the upper left side of the bar code on the package. · Sony BP-DM10 Rechargeable battery: 2. 4 V DC, Ni-Cd, 650 mAh Sony BP-DM20 Rechargeable battery: 2. 4 V DC, Ni-MH, 1, 200 mAh · Two LR6 (size AA) batteries: 3 V DC · AC power adaptor (DC IN 4. 5 V jack): U2 model: 120 V, 60 Hz · Sony DCC-E245 car battery cord for use on car battery: 4. 5 V DC Dimensions (w/h/d) (without projecting parts and controls) Approx. 129 × 28 × 146 mm (5 1/8× 1 1/8 × 5 3/4 in. ) Mass (without rechargeable battery) Approx. 220 g (7. 8 oz) Operating temperature 5°C - 35°C (41°F - 95°F) On dry and rechargeable batteries · Do not throw the batteries into fire. · Do not carry the rechargeable battery with coins or other metallic objects. [. . . ] It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. The battery life is short. m Manganese batteries are used. m Replace the batteries with new ones. Switched ignition function (when using the car battery cord) With this feature, your player stops automatically when you turn off the engine of the car. [. . . ]