User manual SONY DEJ01

[. . . ] 3-867-149-24 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). " D-E01 D-EJ01 © 1999 by Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] Each time you press REPEAT/ENTER, the track number appears. Notes · When you finish entering the 64 track in step 3, the first selected track appears in the display. · If you select more than 64 tracks, the first selected tracks are erased. 12 Available features G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. This function provides a higher level of shock protection than the traditional one. Remaining time on the current track Track number Press DISPLAY twice. Remaining time on the CD* The number of tracks left* * Not displayed during Single play, Shuffle play or PGM play. 14 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Set AVLS to "LIMIT. " Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. CD player Remote control Available features Displayed when the volume is turned up and beyond a certain level. CHG/HOLD lamp flashes while the HOLD function is working. Displayed when the HOLD function is working. To turn off the AVLS function Set AVLS to "NORM. " You can use the HOLD function with both the CD player and remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the opposite direction of the arrow. 15 Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. · Adjust the volume properly on the connected device so that the sound will not be distorted. When using the connecting cord · You cannot adjust the volume of the headphones/earphones on the CD player or the remote control. · If the sound is distorted, connect the device to the i/REMOTE jack. When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc. , make sure that the CD player is in pause before operating the recording procedures. About the SOUND functions when using the connecting cord See the following table for valid functions according to the types of connecting cord: to LINE OUT (OPTICAL) Optical digital connecting cord Connecting cord Left (white) Right (red) Connecting cord Optical digital connecting cord SOUND No Yes* * Functions only on the output sound from the i/REMOTE jack; does not function on the output sound from the LINE OUT (OPTICAL) jack. MiniDisc recorder, DAT deck, etc. Stereo system, cassette recorder, radio cassette recorder, etc. 16 Using your CD player in a car You can use your CD player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this CD player. When you use your CD player in a car, install it securely in a location that does not interfere with your driving. Optional car accessory needed To connect your CD player to a car cassette deck, you need the following car accessories in "Accessories (supplied/optional)": · Car battery cord, and · Car connecting pack* For details, see the instruction manuals that come with the optional accessories. * Noise may be heard if you use an optional connecting cord. It is recommended that you use a Sony car connecting pack to reduce noise. Connecting your CD player Switched ignition function (when using the car battery cord) With this feature, your CD player stops automatically when you turn off the car engine (turn off the ignition key) even if the batteries are inserted in the CD player. [. . . ] (page 19) c Use only the AC power adaptor or car battery cord in "Accessories (supplied/optional). " (page 25) c Remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 6, 18, 19) c The CD is dirty or defective. (page 21) c Check that the CD is inserted with the label side up. (page 6) c The CD is not inserted securely. [. . . ]