User manual SONY DEJ711

[. . . ] 3-046-668-11 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). " D-EJ711 D-EJ715 © 2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] Press SOUND to select "BASS "BASS . " "No indication" (Normal play) BASS BASS " or Available features The selected sound mode is displayed. To turn off the G-PROTECTION function Set G-PROTECTION to "OFF. " Note Sound may skip if: ­ the CD player receives stronger continuous shock than expected or ­ a dirty or scratched CD is played. "BASS " enhances the bass sound more than "BASS ". Note If the sound is distorted when using the SOUND function, turn down the volume. 13 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Set AVLS to "LIMIT. " Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. Flashes when the volume is turned up and beyond a certain level. Displayed when the HOLD function is working. To turn off the AVLS function Set AVLS to "NORM. " You can use the HOLD function with both the CD player and remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. By connecting a Sony MD Walkman (MZ-R90/ R91), which supports Joint Text, to this CD player, you can copy the CD text onto an MD during recording. You must use an optical digital connecting cable (POC-5B or other model, not supplied) and the RK-TXT1 CD text connecting cable (not supplied) to make the connections. For details, refer to the operating instructions of the MD Walkman. Using your CD player in a car You can use your CD player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this CD player. When you use your CD player in a car, install it securely in a location that does not interfere with your driving. Optional car accessory needed To connect your CD player to a car cassette deck, you need the following car accessories in "Accessories (supplied/optional)": · Car battery cord, and · Car connecting pack* For details, see the instruction manuals that come with the optional accessories. * Noise may be heard if you use an optional connecting cord. It is recommended that you use a Sony car connecting pack to reduce noise. Connecting your CD player Switched ignition function (when using the car battery cord) With this feature, your CD player stops automatically when you turn off the car engine (turn off the ignition key) even if the batteries are inserted in the CD player. This function is invalid depending on the car models. Note Use only the car battery cord listed in "Accessories (supplied/optional). " If you use any other car battery cord, a heat, smoke or malfunction may occur. 17 B Connecting a power source You can use the following power sources: · Rechargeable batteries · AC power adaptor (see "Playing a CD") · LR6 (size AA) alkaline batteries For the battery life and charging time of the rechargeable batteries, see "Specifications. " 3 Connect the AC power adaptor to the DC IN 4. 5 V jack of your CD player and an AC outlet, then press x/CHG to start charging. If the AC power adaptor does not fit the AC outlet, use the AC plug adaptor. Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. · NC-WMAA · NH-WM2AA x/CHG button to DC IN 4. 5 V 1 Open the battery compartment lid. AC power adaptor (rear) to an AC outlet 2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid. The CD player charges the batteries. The "CHG" indicator turns on in the display, and the indicator sections of light up in succession. When the batteries are completely charged, the "CHG" and indicators turn off. If you press x/CHG after the charge has already been completed, the indicator flashes and "Full" appears in the display. 4 Disconnect the AC power adaptor. 18 To remove the rechargeable batteries Remove the batteries as illustrated below. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit. To attach the battery compartment lid If the battery compartment lid is detached by an accidental drop, excessive force, etc. , attach it as illustrated below. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r r Battery power is getting low. Battery power is low. Connecting a power source Lo batt* Batteries are depleted. * Beep sounds. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. Notes · The indicator sections of roughly shows the remaining battery power. [. . . ] (pages 7, 18, 19, 20) c The CD is dirty or defective. (page 21) c Check that the CD is inserted with the label side up. (page 7) c Moisture condensation has occurred. Leave the CD player aside for several hours until the moisture evaporates. [. . . ]