User manual SONY DEJ985

[. . . ] 3-245-828-71 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). " "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. D-EJ985 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. [. . . ] When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc. , make sure that the CD player is in pause before operating the recording procedures. About the G-PROTECTION and SOUND functions when using the connecting cord or optical digital connecting cord · To record high quality CD sound, set the G-PROTECTION switch to "1. " · The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT (OPTICAL) jack. to LINE OUT (OPTICAL) Optical digital connecting cord Connecting cord Left (white) Right (red) MiniDisc recorder, DAT deck, etc. Stereo system, cassette recorder, radio cassette recorder, etc. 18 B Connecting to a power source You can use the following power sources: · Rechargeable batteries · AC power adaptor (see "Playing a CD") · LR6 (size AA) alkaline batteries (external battery case) For the battery life and charging time of the rechargeable batteries, see "Specifications. " 3 Connect the AC power adaptor to the DC IN 4. 5 V jack of the supplied charging stand and an AC outlet. Then place the CD player on the supplied charging stand, aligning the V mark on the CD player with the v mark on the stand. CHARGE lamp Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. · NH-14WM (A) 1 Open the battery compartment lid inside your CD player. to DC IN 4. 5 V Align V with v. Connecting to a power source 2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place. AC power adaptor to an AC outlet (Continued) Insert the # end first (for both batteries). 19 Using the rechargeable batteries Charging of the batteries starts. In the display of the remote control, "Charging" indication flashes and the indicator sections of light up in succession. The CHARGE lamp lights up on the CD player. When the batteries are completely charged, all indications in the display disappear and the CHARGE lamp goes off. To charge the rechargeable batteries without using the supplied charging stand Connect the AC power adaptor to the EXT BATT/DC IN 4. 5 V jack of your CD player and an AC outlet, then press x/CHARGE to start charging. x/CHARGE button·CHARGE lamp to EXT BATT/ DC IN 4. 5 V AC power adaptor to an AC outlet Notes · When charging the batteries using the charging stand, be sure to remove the external battery case. · During charging, the CD player and the rechargeable batteries become hot. · If you press the jog lever during charging, charging stops and playback of the CD starts. · If you place the CD player on the charging stand during playback, playback stops and charging starts. · Place the CD player on the charging stand securely, aligning the V mark on the CD player with the v mark on the stand. Make sure that the CHARGE lamp on the CD player lights up. Wrong placement interrupts charging or playback. 20 To remove the rechargeable batteries Push # end to remove the batteries. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit. Notes on the supplied charging stand · The supplied charging stand can be used only with this CD player. No other model can be charged using this stand. · When using the supplied charging stand, charge the NH-14WM (A) rechargeable batteries only. · During charging, the CD player and the rechargeable batteries become hot. · Do not place coins or other metallic objects on the charging stand. [. . . ] c The CD player is not placed securely on the charging stand. Place the player on the stand, aligning the V mark on the player and the v mark on the stand. Make sure that the CHARGE lamp lights up. (page 19) Additional information (Continued) 27 Troubleshooting Symptom Playback starts from the point you stopped. [. . . ]