User manual SONY DFS-500 VIDEO SWITCHER

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. Owner's Record The model and the serial numbers are located at the rear. Record the serial number in the space provided below. [. . . ] The indications in the display keep flashing until all preset stations are cleared, then stop flashing and disappear from the display. 14 Presetting radio stations You can preset up to 51 stations: 7 for TV, 4 for WB, 30 for FM and 10 for AM. 1 2 3 Press TV, WB, FM or AM to select the band (direct power-on). Preset number 1 will flash in the display. The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received. If you want to preset the received station, press MEMORY while the preset number is flashing. The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press MEMORY within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station. Repeat step 3 until all receivable stations are preset. If the stations have already been stored, the newly preset stations will replace the old ones. Using the radio 4 To stop scanning · Press TV, WB, FM or AM. Hold down SOUND until "AVLS" appears in the display. Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. Displayed when AVLS function is activated. To turn off the AVLS function Hold down SOUND until "AVLS" disappears from the display. Note If you use the SOUND function and the AVLS function at the same time, sound may be distorted. If this happens, turn down the volume. Flashes if you press any button when the HOLD function is activated. To unlock the controls Slide HOLD in the opposite direction of the arrow. 18 Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 2 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Battery power is full. r r r r · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. · Do not touch the AC power adaptor with wet hands. On rechargeable batteries and dry batteries · Do not charge the dry batteries. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally contacted by a metallic object. · Do not mix rechargeable batteries with dry batteries. · Do not mix new batteries with old ones. · Do not use different types of batteries together. · When the batteries are not to be used for a long time, remove them. · If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly. Connecting to a power source Battery power is getting low. Battery power is low. [. . . ] Leave the CD player aside for several hours until the moisture evaporates. c Close the lid of the battery compartment firmly. (page 21) c Make sure the batteries are inserted correctly. (pages 21 - 23) c Connect the AC power adaptor to an AC outlet securely. [. . . ]