User manual SONY DHC-MD5

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. This caution label is located inside the unit. [. . . ] The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into tracks B and C. 2 While monitoring the sound, turn MULTI JOG to the starting point to be divided. You can check the display and shift the point between -128 and +127 (01 is about 0. Press ENTER/YES again when you find the point to be divided. "Complete" appears for a few seconds and the newly created track begins playing. You can also divide tracks while recording. The new track will have no track title even if the original track was labelled. â· When "SHUFFLE" or "PROGRAM" appears in the display, press PLAY MODE repeatedly until the indication disappears. Press EDIT/NO, then turn MULTI JOG until "Divide ?This function lets you put several tracks or several independently recorded portions into a single track. The total number of tracks decrease by one and all the tracks following the combined ones are renumbered. " appear alternately and the portion where the two tracks will join (i. , the end of the first track and the beginning of the second track) is played repeatedly. If you want to cancel the combine function at this time, press . Press ENTER/YES again when you find the portion. "Complete" appears for a few seconds and the tracks are combined. When "SHUFFLE" or "PROGRAM" appears in the display, press PLAY MODE repeatedly until the indication disappears. â· If both of the combined tracks have track titles, the title of the second track is erased. This happens when you've edited the same track too many times. This is due to a technical limitation of the MD system and is not a mechanical error. Turn MULTI JOG until the second track of the two to be combined appears. [. . . ] Sound comes from one channel or unbalanced left and right volume. The power cord was unplugged or a power interruption occurred during recording. 1 Press EDIT/NO, then turn MULTI JOG during recording (or recording pause) until "Attenuate ?If other problems not described above occur, reset the system as follows: 1 Unplug the mains lead. [. . . ]