User manual SONY DHC-MD515

[. . . ] 3-861-229-13(1) Mini Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. DHC-MD515 ©1997 by Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. [. . . ] If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recording and starts the new recording from there. 1 2 3 12 Press ENTER/YES. "SYNC" starts flashing, then remains lit in the display. The MD deck stands by for recording and the CD player pauses. If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recording and starts the new recording from there. 1 CD1-3 SYNC LEVEL SYNC 0. 00 PROGRAM1 CD1-3 2 3 SYNC LEVEL SYNC 0. 00 PROGRAM1 1 2 3 1 13 Make sure that "SYNC" stops flashing, then press (P. Recording starts from the PROGRAM 1 through PROGRAM 3. When the program changes, the corresponding MD is loaded at the same time. Both the CD player and MD deck stop automatically when the recording is completed. 13 Make sure that "SYNC" stops flashing, then press (P. CD starts playing and MD starts recording. Both the CD player and MD deck stop automatically when the recording is completed. To cancel recording Press p while programming the tracks, or EDIT/NO after pressing the REC/CD-MD SYNC button. To stop recording Press p. 38 When recording is finished Remove the MD. "TOC Write" flashes and the recorded contents are memorized on the MD. While "TOC Write" is flashing Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while "TOC" is flashing. Notes · When recording only one program by selecting "NORMAL, " you can record only on the MD in the MD 1 slot. · When recording multiple programs, each program is recorded only on the MD inserted in the same slot number as the desired program number. · When recording multiple programs by selecting "3PGM n 3MD, " recording of the current program is skipped and recording of the next program starts in the following cases: -- There is no MD in the same slot number as the program number you want to record. · If the MD becomes full in the middle of the recording, both the CD player and MD deck stop. When recording multiple programs, recording of the next program starts. Recording only the first track on each CD -- Hit Parade This feature is useful when you record only the first track on each CD in succession. EDIT/NO 5 36 TAPE 4 1 2 Insert CDs. 4 p Recording from three CDs Insert a recordable MD in the MD 1 slot. You can record only on the MD inserted in the MD 1 slot. If the MD 1 indicator is lit green, press MD 6 and remove the previously inserted MD. 3 4 Press the CD button to switch the function to CD. Press REC/CD-MD SYNC, then turn MULTI JOG until "HIT PARADE ?" appears. 1 HIT PARADE ? 2 3 SYNC LEVEL- SYNC ALL DISCS 1 continued 39 Recording only the first track on each CD (continued) 5 Press ENTER/YES. "SYNC" starts flashing, then remains lit in the display. The MD deck stands by for recording and the CD player pauses. If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recording and starts the new recording from there. 1 Recording the current CD track -- Rec It You can select the CD track you want to record while listening, then start recording immediately. 3 TAPE CD1-1 2 3 SYNC LEVEL SYNC 0. 00 PROGRAM 3 1 6 Make sure that "SYNC" stops flashing, then press (P. CD starts playing and MD starts recording. Both the CD player and MD deck stop automatically when the recording is completed. 4 1 2 Insert a CD. p Insert a recordable MD (see page 18). You can record on any MDs inserted in MD 1 ­ 3 slots. Recording from four or more CDs Repeat steps 1 and 4 through 6. 3 Press the CD button to switch the function to CD, then press MD/CD 1 ­ 3. CD starts playing. To cancel recording Press EDIT/NO in step 4. 4 To stop recording Press p. Press REC IT when you find the desired track. The CD goes back to the beginning of the track, and recording starts. The MD deck stops automatically when the current track is finished. When recording is finished Remove the MD. "TOC Write" flashes and the recorded contents are memorized on the MD. To stop recording Press p. While "TOC Write" is flashing Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while "TOC" is flashing. Note You can record only on the MD inserted in the MD 1 slot. When recording is finished Remove the MD. [. . . ] NO DISC There is no MD in the deck. continued 67 Troubleshooting (continued) CD File Full The system has already stored the maximum number of Disc Memos (100 Disc Memos). ­ OVER ­ You have reached the end of the CD while pressing the ) button during pause. No Name The selected MD or track is not labeled. No Track The inserted MD has a disc title but no tracks. OVER You have reached the end of the last track during high-speed search. [. . . ]