User manual SONY DHC-MD555

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] You can erase a track simply by specifying its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. To return to the condition before labeling/erasing You can return to the original condition immediately after labeling or erasing a title (see page 61). All the tracks following the erased one are renumbered, so when erasing multiple tracks (e. , tracks 2, 5 and 6), we recommend erasing from the higher numbered tracks. " appears for a few seconds and the selected track and title are erased. The MD deck starts playing the track following the erased track. To return to the condition before erasing You can return to the original condition immediately after erasing a track (see page 61). " appears when the track was recorded or edited on another deck and is record protected. To erase the track, press ENTER/YES while "Tr Erase ?SKIP on the remote repeatedly until the button of the desired MD lights green. You can erase the disc title, all recorded tracks and their titles at once. Turn MULTI JOG until the desired track number appears. SKIP on the remote repeatedly until the button of the desired MD lights green. " appears for a few seconds and the disc title, all recorded tracks and their titles are erased. To return to the condition before erasing You can return to the original condition immediately after erasing tracks (see page 61). SKIP on the remote repeatedly until the button of the desired MD lights green. You can specify a portion within a track and erase the portion with ease. You can shift the desired portion by frame*, minute or second intervals. This function is convenient when erasing unnecessary sections after recording a satellite broadcast or FM broadcast. Turn MULTI JOG until the desired track number appears, then press ENTER/YES. "­Rehearsal­" and "Point A ok? [. . . ] You tried to record on a premastered MD. M-- You inserted a disc into a slot containing an MD included in a program you made (whose MD 1 ­ 5 button lights green), so the entire program was cleared. You pressed PLAY MODE while an MD is playing. M You cannot change the play mode during play. [. . . ]