User manual SONY DHC-MD77

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This system is equipped with Dolby Noise Reduction* system (MHC-EX66/EX660 only). [. . . ] To create a medley by combining several phrases Use the Divide and Erase Functions to erase unwanted portions, then put several phrases into a single track using the Combine Function (see page 49). By using the editing functions in this way, you can create original MD albums. note on editing an MD The MD editing is complete only after all the editing information is entered to TOC at which point TOC stops flashing and goes out. Be careful not to disconnect the mains lead or move the deck before this point. Before disconnecting the mains lead, do the following: ­ Remove the MD. The MD system lets you erase unwanted sound quickly and easily. Turn SELECTOR until the track number you want appears. The track number you want Press EDIT/NO repeatedly until the selected track number and "2 Erase ?"Complete" appears for a few seconds and the selected track and title are erased. You can erase a track simply by specifying its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. " appears when the track was recorded or edited on another deck and is record protected. To erase the track, press ENTER/YES while "Erase!By using the Divide (see page 48), Erase (see page 45), and Combine (see page 49) Functions, you can erase specific portions of a track. You can erase the disc title, all recorded tracks and their titles at once. While the deck is stopped, press EDIT/NO repeatedly until "All Erase ?"Complete" appears for a few seconds and all recorded tracks and their titles are erased. By using the Move Function, you can change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered. Track number Original tracks Move track C to the second position. Turn SELECTOR until the new track position appears. Turn SELECTOR until the track number you want to move appears. [. . . ] /Automatic Source Selection or One Touch Play feature does not work (when using the optional TC-TX77/TX770). Functions linked to the DHC-MD77/ EX77MD/EX770MD, such as CD Synchro Recording, do not work (when using the optional TC-TX77/TX770). Auto Cut The MD deck is pausing the recording because silence continued for 30 seconds or more during digital recording. blank Disc The inserted recordable MD is brand new or all tracks on the MD have been erased. [. . . ]