User manual SONY DHC-ZX50MD

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This caution label is located inside the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Each time you press the button during normal playback, the display changes as follows: N Playing time on the current track µ Remaining time on the current track µ Remaining time on current CD (1 DISC mode) or "PLAY" display (ALL DISCS mode) µ Clock display (for eight seconds) µ "EFFECT ON (OFF)" µ Name of spectrum analyzer display pattern To check the total playing time and the number of tracks on a CD press DISPLAY/DEMO in the stop mode. If you press DISPLAY/DEMO again, the clock display appears for eight seconds then the display returns to the previous indication. This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. Do the following procedure to change the repeat mode. To repeat All the tracks on the current CD All the tracks on all CDs Only one track Press PLAY MODE repeatedly until "1 DISC" appears in the display. pLAY MODE repeatedly until "ALL DISCS" appears in the display. REPEAT repeatedly until "REPEAT 1" appears in the display while playing the track you want to repeat. Playing the CD tracks in random order ­ Shuffle Play You can play all the tracks on one CD or all CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". This lets you create original recordings. With the flash function, you can "flash" the CD sound during playback. This lets you create original recordings. Playback at the point you want to start the Loop function, and release to resume normal play. to adjust the loop length Turn the jog dial while holding LOOP (or press MUSIC MENU > or . While holding LOOP on the remote) to select different loop lengths (LOOP 1~20). Playback at the point you want to start the Flash function, and release to resume normal play. to adjust the flash length Turn the jog dial while holding FLASH (or press MUSIC MENU > or . While holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together The loop and flash length cannot be adjusted during this operation. To record the flash effect, use the analog (MD/ VIDEO OUT) connections or this unit's tape deck. [. . . ] If there is a power outage lasting longer than half a day, redo the following: -- Clock setting (see "Step 2: Setting the time") -- Preset stations (see "Step 3: Presetting radio stations") -- Timer settings (see "Waking up to music" and "Timer-recording radio programs"). Insert only the stripped portion of the speaker cord into the SPEAKER jack. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. Sound comes from one channel or unbalanced left and right volume. [. . . ]