User manual SONY DHCMD500

[. . . ] 47 Falling asleep to music -- Sleep Timer . Perform the following procedure 1 to 4 to hook up your system using the supplied cords and accessories. Keep the speaker cords away from the aerials to prevent noise. Bottom of the system to the position of your local power line voltage (for models with a voltage selector). [. . . ] You can edit an MD only when: · Check the following, before editing. You can use upper case, lower case, numbers, and symbols for the titles. ⷠErase -- Erasing recordings (page 37) Use this function to erase a single track one by one, all the tracks at once, or a portion of a track. ⷠMove -- Changing the order of tracks (page 40) Use this function to change the track numbering. ⷠDivide -- Adding track numbers (page 41) Use this function to add track numbers. This lets you locate your favourite phrases quickly. ⷠCombine -- Combining recorded tracks (page 42) By using this function, two tracks are combined to a single track. You can combine the tracks which are not numerically consecutive, i. ⷠUndo -- Cancelling the last edit (page 44) Use this function to cancel the last edit and restore the contents of the MD to the condition before the edit. You can edit the MD only in normal play mode. "TOC" lights up or starts flashing. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. Track number Original tracks Erase track 2 To check the track title, press SCROLL during play. Or > repeatedly until the desired title to erase appears, then press ENTER/YES. When erasing multiple tracks, you should proceed in order from high to low track number to prevent the renumbering of tracks that have not been erased yet. To return to the condition before labelling or erasing You can return to the original condition immediately after labelling or erasing a title (see page 44). You can erase the disc title, all recorded tracks and their titles at once. Or > repeatedly until the desired track number appears. " appears for a few seconds and the disc title, all recorded tracks and their titles are erased. " appears for a few seconds and the selected track and title are erased. " appears when the track was recorded or edited on another deck and is protected. To erase the track, press ENTER/YES while "Erase? [. . . ] If any problem persists, consult your nearest Sony dealer. C12/CannotCopy You tried to record a CD or MD with a format that the system does not support, such as a CDROM. CRemove the disc and turn off the system once, then turn it on again. The MD is dirty or scratched, or the MD does not meet the standards. [. . . ]