User manual SONY DHCZX50MD

[. . . ] 4-229-972-12(1) Mini Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. _______________ DHC-ZX50MD ©2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. [. . . ] 6 Move the multi stick toward b or B repeatedly to select "Name In?", then press PUSH ENTER. 7 Move the multi stick toward b or B repeatedly to select the disc or track you want to label, then press PUSH ENTER. Follow steps 3 through 7 from the previous page. 1 Press FUNCTION repeatedly until "MD" appears in the display. 2 While MD is stopped, press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "MD Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "MD Edit ?", then press PUSH ENTER. 5 Move the multi stick toward b or B repeatedly to select "MD Name?", then press PUSH ENTER. 6 Move the multi stick toward b or B repeatedly to select "Name Copy?", then press PUSH ENTER. 7 Move the multi stick toward b or B repeatedly until "Disc" (when copying the disc title) or the track you want to copy the title from appears, then press PUSH ENTER. When "No Name" appears, the disc or the track has not been labelled. 8 Move the multi stick toward b or B repeatedly until "Disc" or the track you want to copy the title to appears, then press PUSH ENTER. When "Overwrite??" appears, the copy destination already has a disc or track title. To continue or copy the title, press PUSH ENTER. Editing an MD continued Note If the MD is record protected, "C11" and "Protected" appears in the display alternately and the MD cannot be recorded on. Press A and remove the MD, slide the record protection tab to the closed position (see page 37), reinsert the MD and try again. 49 Labelling an MD (continued) To check the titles To check the disc titles, press SCROLL on the remote while playback is stopped. To check the track titles, press SCROLL while playing. Press the button again to resume scrolling. To erase all the titles in a disc 1 Press FUNCTION repeatedly until "MD" appears in the display. 2 While MD is stopped, press MODE SELECT repeatedly to select "Set Up Mode", then press PUSH ENTER. 3 Move the multi stick toward b or B repeatedly to select "MD Set Up ?", then press PUSH ENTER. 4 Move the multi stick toward b or B repeatedly to select "MD Edit ?", then press PUSH ENTER. 5 Move the multi stick toward b or B repeatedly to select "MD Name?", then press PUSH ENTER. 6 Move the multi stick toward b or B repeatedly to select "Name All Ers?", then press PUSH ENTER. All the titles in the disc are cleared. To erase titles 1 Press FUNCTION repeatedly until "MD" appears in the display. [. . . ] and European models: 8 ohms Other models: 6 ohms Dimensions (w/h/d) Approx. 5. 5 kg net per speaker 98 Parts Identification for the remote You can also operate the system with the supplied remote. *: You can operate with the remote only. TAPE Remote Button(s) TAPE A N TAPE B N X* x . /> Function Starts playback. Each time you press this button, the tape reverses direction. [. . . ]