User manual SONY DNE718CK

[. . . ] 3-253-128-21 (1) Portable CD Player Operating Instructions "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. D-NE718CK © 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] If the number of files or groups surpasses these figures, a file number such as "401" or a group number such as "101" will be displayed instead of names. 20 Playing tracks in your favorite order (PGM play) You can program the CD player to play up to 64 tracks ("files" when playing an ATRAC/MP3 CD) in your favorite order. 1 While the CD player is stopped, press PLAY MODE repeatedly until "PGM" appears. Audio CD ATRAC/MP3 CD 2 Turn the jog dial (or press . or >) to select your favorite track or file, then press ENTER. The playing order increases by one. Audio CD Playing order Track number ATRAC/MP3 CD* Group name Playback options Playing order File name m Playing order m Group name Playing order *You can also select another group using + or ­. 3 4 Repeat step 2 to select the tracks or files in your favorite order. Press u, or press and hold ENTER until play starts. (Continued) 21 To check the program During programming: Press ENTER repeatedly before step 4. During stop: Press PLAY MODE repeatedly until "PGM" flashes, then press ENTER. Each time you press ENTER, the track number appears. Notes · When you finish entering the 64th track in step 2, the first track selected appears in the display. · If you select more than 64 tracks, the first tracks selected are erased. When playing ATRAC3plus/ATRAC3/MP3 files In PGM mode, you can program up to 64 files the same as you would for audio CD tracks. 22 B Available features The G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping during many active uses. When you set the G-PROTECTION switch on your CD player to "2", the GPROTECTION function will be enhanced compared to "1. " To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PROTECTION switch to "1. " While taking harder exercise, it is recommended that you set it to "2. " Note Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played or ­ when using poor-quality CD-Rs/CD-RWs or if there is a problem with the original recording device or application software. Checking the time remaining on the CD and the number of tracks left (audio CD) Each time you press DISPLAY, the display changes as follows. For an audio CD containing CD text information, information in parentheses also appears. t Track number and elapsed playing time (name of the current track) r Track number and remaining time of the current track (name of the current track/artist name) r The number of tracks left* and the time remaining on the CD* (album name/artist name) Available features * Not displayed during Single play, Shuffle play or Bookmark track play. 23 Checking information on a CD with ATRAC3plus/ATRAC3/ MP3 files You can check information on a CD with ATRAC3plus/ATRAC3/MP3 files using DISPLAY. You can also check ID3 tag information if the file has that information stored. Each time you press DISPLAY, the display changes as follows: t File name, group name and elapsed playing time r Artist name, CODEC information*, remaining time of the current file r The total number of groups and the total number of files *Variable bit rate and sampling frequencies Emphasizing the bass sound (SOUND) You can emphasize the bass-boosted sound. Press SOUND to select "BASS "BASS . " No indication (Normal play) " or "BASS "BASS " " The selected sound mode is displayed. Notes · If the group does not have a group name, "ROOT" appears in the display. · If the file does not have ID3 tag information, "- - - -" appears in the display. " enhances the bass sound more "BASS than "BASS . " Note If the sound is distorted when using the SOUND function, turn down the volume. 24 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Press and hold SOUND until "AVLS ON" appears in the display. Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 2 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing x/CHARGE for about one second or more. Flashes when the volume is turned up beyond a certain level. To turn off the AVLS function Press and hold SOUND until "AVLS OFF" appears in the display. Note If you use the SOUND function and the AVLS function at the same time, sound may be distorted. If this happens, turn down the volume. To turn on the beep sound Remove the power source and then connect the power source without pressing x/CHARGE. Available features Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. "HOLD" flashes when the HOLD function is activated. To unlock the controls Slide HOLD in the opposite direction of the arrow. 25 B Using in a car Installing in a car Where to place your CD player · Install the CD player in a location which: ­ does not interfere with your driving. ­ does not interfere with the glove box lid or ashtray. ­ is stable, and where nothing around it may interfere with installation. · Do not install the CD player near heat sources or where subject to direct sunlight, excessive dust, or moisture (especially on a dashboard. ) Please understand that we will not incur any obligations for troubles caused by incorrect installation. [. . . ] (resume function) c c The CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 32) c During stop, press x/CHARGE. (page 29) c The resume function is working. [. . . ]