User manual SONY DNF400

[. . . ] 3-266-366-12 (1) FM/AM Portable CD Player Operating Instructions Owner's Record The model number and the serial number are located at the rear of the CD player. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ___________________________ "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. [. . . ] Press V or v to select "OPTION, " then press u/ENTER. Press V or v to select "GPROTECTION, " then press u/ ENTER to enter the selection. Press V or v to select "G-PRO 1" or "G-PRO 2, " then press u/ ENTER to enter the selection. If you select "G-PRO 2, " the GPROTECTION function will be enhanced compared to "G-PRO 1. " To enjoy high quality CD sound, select "G-PRO 1. " To cancel the AVLS function Perform steps 1 - 3, changing the AVLS setting to "OFF. " 2 3 22 Stopping playback automatically (OFF TIMER) You can set the CD player to stop the play automatically within a range of 1 to 99 minutes. While the timer function is working, " " appears at about 5 second intervals*. * Only when Screen 1 or 2 is displayed (page 15) To cancel the OFF TIMER function The OFF TIMER function will be canceled: · When you perform steps 1 - 3, changing the OFF TIMER setting to "OFF. " · When you listen to the radio. Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. "HOLD" flashes if you press any button when the HOLD function is activated. To unlock the controls Slide HOLD in the direction opposite to that of the arrow. Available features 1 2 3 Press and hold DISPLAY/MENU until the MENU screen appears. Press V or v to select "OPTION, " then press u/ENTER. Press V or v to select "TIMER, " then press u/ENTER to enter the selection. Press V or v to select "10 min*, " then press u/ENTER. * Default setting. If you have changed the setting, the length of time already set appears. 4 Press V or v to select the length of time you want to set from "01 min" to "99 min", then press u/ ENTER to enter the selection. · To increase/decrease by 5 minutes: Press V or v repeatedly. · To increase/decrease by 1 minute: Press V or v for 2 seconds or more. To return to the previous screen Press ­. To cancel the setting operation Press x. To check the length of time before the CD player stops playback During play, perform steps 1 - 3. 23 Turning off the beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Playing tracks continuously (SEAMLESS) (ATRAC CD only) You can play live concert music, etc. without space between the tracks. 1 2 3 Press and hold DISPLAY/MENU until the MENU screen appears. Press V or v to select "OPTION, " then press u/ENTER. Press V or v to select "BEEP, " then press u/ENTER to enter the selection. Press V or v to select "OFF, " then press u/ENTER to enter the selection. 1 While play is stopped, press and hold DISPLAY/MENU until the MENU screen appears. Press V or v to select "OPTION, " then press u/ENTER. [. . . ] Or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 13, 14, 30) c Close the lid of the battery compartment firmly. (page 30) c The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. [. . . ]