User manual SONY DPF-A700

[. . . ] 4-259-438-13 (1) For your safety Digital Photo Frame DPF-A710/A700 Let's get the photo frame ready Let's view an image Try using various functions Troubleshooting Additional information Operating Instructions Before operating this unit, please read this manual thoroughly and retain it for future reference. Owner's Record The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ________________________ Product lineup differs by country and region. © 2010 Sony Corporation WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] As shown in the right-most illustration below, make sure to insert the following types of memory cards with inserted in the appropriate adaptor. Inserting a memory card Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame). 1miniSD /miniSDHC 1 miniSD/ miniSDHC adaptor SD memory Card (Slot A) 2microSD/microSDHC "Memory Stick" (Slot A) 2 microSD/ microSDHC adaptor 3"Memory Stick Micro" "M2" adaptor (standard size) "Memory Stick Duo" (Slot B) Access lamp 3 "M2" adaptor (Duo size) When you insert a memory card The images on the memory card are automatically displayed. z Tip S-Frame fails to auto rotate if: ­ An image file has been shot with a DSC which doesn't support Exif rotate tag recording. ­ An image file is retouched and saved with retouching software which breaks the Exif rotate tag. If you switch off the power while they are being displayed If you switch the power back on, the same images continue to be displayed. If the access lamp does not flash Reinsert the memory card after checking the label side of the memory card. About the A and B slots If you insert memory cards both into the A and B slots simultaneously, the photo frame will not work properly. 14 GB Changing the display 1 Press VIEW MODE repeatedly to select the view mode you want to display. PNote If you do not operate the photo frame for a certain period of time, the style indicated by the cursor is automatically selected. The display changes to the selected view mode. Using the remote control (DPF-A710 only) Press the VIEW MODE button corresponding to the view mode you want to display. VIEW MODE buttons Let's view an image z Tip Style descriptions: CD-ROM (Handbook) page 15 to page 18 2 Press B/b/v/V to select a desired style, and then press ENTER. The view mode screen is displayed. Displays Styles Single view, Multi image view, Clock view, Calendar view, Time Machine, Random view Clock1 to Clock10 Calendar1 to Calendar3 Clock and calendar Slideshow Entire image, Fit to screen, Entire image (with Exif), Fit to screen (with Exif) Index 1 to Index 2 Index Continued 15 GB About the information displayed on the LCD screen 4Setting information Icons Meaning Protect indication Associated file indication (Displayed when there is an associated file such as a motion file or a miniature e-mail image file. ) 5Image number (folder-file number) The following information is displayed. 1Display type (In the Single view mode) ­ Entire image ­ Fit to screen ­ Entire image (with Exif) ­ Fit to screen (with Exif) 2Ordinal number of the displayed image/Total number of images Input media indication for the displayed image is shown as follows: Icons Meaning Internal memory "Memory Stick" input SD Memory Card input 3Image details This is displayed if the image is DCF compliant. If the image does not comply with DCF, its file name is displayed. If you named or renamed the file on your computer and the file name includes characters other than alphanumeric characters, the file name may not be able to be displayed properly on the photo frame. Also, for a file created on a computer or other device, a maximum of 10 characters from the beginning of the file name can be displayed. PNote Only alphanumeric characters can be displayed. 6Shooting date/time ­ File format (JPEG(4:4:4), JPEG(4:2:2), JPEG(4:2:0), BMP, TIFF, RAW) ­ Number of pixels (width × height) ­ Manufacturer name of image input device ­ Model name of image input device ­ Shutter speed (e. g. : 1/8) ­ Aperture value (e. g. : F2. 8) ­ Exposure value (e. g. : +0. 0EV) ­ Rotation information 16 GB Try using various functions Various functions · Importing an image (a memory card b the internal memory) · Exporting an image (the internal memory b a memory card) · Deleting an image z Tips x Importing The number of images to be saved in the internal memory: · Resize: approx. 250 images · Original: the number of images may vary, depending on the original image file size. x Exporting Any memory card that is not recognized by this photo frame is shown in gray and you cannot select it. 1 2 3 When a desired image is displayed, press MENU and then B/b to select the (Editing) tab. Select the desired menu item (Import/Export/Delete), and then press ENTER. all images], and then press ENTER. (". . . " stands for each command: "Import", "Export", or "Delete". ) [. . . this image]: Press v/V to select the destination, and then press ENTER. multiple images]: Press B/b/v/V to select a desired image in the image list, and then press ENTER to add "". Repeat this operation to select multiple images. PNotes x During exporting/deleting Avoid doing the following. Doing so may damage this photo frame, memory card, or the data: · Turning off the power · Removing a memory card · Inserting another card Try using various functions x When deleting If deletion has started, the deleted image cannot be recovered even if you stop deletion. To clear the selection: Select the image and then press ENTER. After you finish selecting the images, press MENU and then select the destination. all images]: All the images are displayed with "". Press MENU and then select the destination. 4 Press v/V to select [Yes], and then press ENTER. 17 GB Specifying the playback device z Tips x What is "playback device"? A memory card or the internal memory. 1 Press MENU then select the with B/b. (Select device) tab x Using the remote control (DPF-A710 only) Press SELECT DEVICE. P Note During Clock and calendar display, you cannot select the (Select device) tab. Using the remote control (DPF-A710 only) Press SELECT DEVICE. 2 Press v/V to select the device you want to display and press ENTER. Adjusting image size and orientation (Zoom in/Zoom out/Rotate) P Note Enlarging an image may reduce the quality depending on the image size. Enlarging/Reducing 1 2 Press MENU, B/b to select the (Editing) tab, v/V to select [Zoom], and then press ENTER. Press v/V to select the enlargement factor and press ENTER. You can enlarge an image from 1. 5 times to 5 times (maximum) the original scale. You can move an enlarged image up, down, left and right. Using the remote control (DPF-A710 only) To enlarge an image, press (zoom in) on the remote control in Single view mode. [. . . ] 202 mm × 141 mm × 26. 5 mm (8 × 5 5/8 × 1 1/16) inches (width/height/depth) Mass Approx. 344 g (12 1/8 ounces) (excluding the AC adaptor) Included accessories See "Checking included items" on page 7. 26 GB x AC adaptor Power requirements - 100 V to 240 V, 50 Hz/60 Hz 0. 3 A Rated output voltage 5 V 1. 5 A Dimensions Approx. 72 mm × 46 mm × 34 mm (2 7/8 × 1 13/16 × 1 3/8) inches (width/height/depth) (excluding the protruding parts) Mass Approx. 108 g (3. 8 ounces) See the label of AC adaptor for more details. [. . . ]