User manual SONY DPF-E710

[. . . ] 4-208-677-12 (1) For your safety Digital Photo Frame DPF-E710 Let's get the photo frame ready Let's view an image Try using various functions Troubleshooting Additional information Operating Instructions Before operating this unit, please read this manual thoroughly and retain it for future reference. © 2010 Sony Corporation WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. Do not expose the batteries to excessive heat such as sunshine, fire or the like. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0. 0005% mercury or 0. 004% lead. [. . . ] multiple images]: Press B/b/v/V to select a desired image in the image list, and then press (ENTER) to add "". Repeat this operation to select multiple images. To clear the selection: Select the image and then press (ENTER). After you finish selecting the images, press MENU and then select the destination. all images]: All the images are displayed with "". Press MENU and then select the destination. 4 16 GB Press v/V to select [Yes], and then press (ENTER). Specifying the playback device Press SELECT DEVICE. Press v/V to select the playback device, and then press (ENTER). z What is "playback device"? A memory card or the internal memory. P Note During Clock and calendar display, you cannot select the (Select device) tab. Adjusting image size and orientation (Zoom in/Zoom out/Rotate) Enlarging/Reducing Press (zoom in) or (zoom out) on the remote control. Try using various functions P Note Enlarging an image may reduce the quality depending on the image size. Saving an enlarged or a reduced image (Crop and save) · When you move the enlarged image with B/b/v/V and press MENU, the image is saved in the trimmed size. · You can select the saving method by pressing v/V. Saving methods: [Save as new image], [Overwrite]* * JPG and JPEG images only zTip You can also enlarge an image using the buttons on the photo frame. Select the desired number of times to enlarge an image from the (Editing) tab. Rotating Press Or: (ROTATE). P Note An enlarged image cannot be rotated. zTip 1 2 Press MENU, B/b to select the (Editing) tab, v/V to select [Rotate], and then press (ENTER). Press v/V to select the desired pattern to rotate, and then press (ENTER). · Rotate 90°: Rotates the image 90 degrees clockwise. · Rotate 180°: Flips the image upside down. · Rotate 270°: Rotates the image 90 degrees counterclockwise. When displaying the images in the internal memory, the information used to rotate the image is retained even after the power is turned off. 17 GB Changing the settings of the auto power on/off function z Tips x During operation The power is turned off automatically at the time you set for [Power-OFF timer]. 1 2 3 Press MENU, B/b to select the (Settings) tab. Press v/V to select [Auto Power ON/OFF], and press (ENTER). Press v/V to select [Setup method], and then press (ENTER). Then, press v/V to select [Simple] or [Auto off], and then press (ENTER). [Simple] x During the standby mode The power is turned on automatically at the time you set for [Power-ON timer]. 1Press V to select [Time setting] , (ENTER). 2Press v/V to select [Power-ON timer] or [Power-OFF timer] , (ENTER). 3Press v/V to select [Enable] , (ENTER). 4 [Auto ON time]/ [Auto OFF time] setting v/V: Set the time. AM or PM is displayed when you select [12 hours] on the time display setting. 5[Auto ON day] / [Auto OFF day] setting v/V: Add a check mark to select the day on which you want activate the timer. Move the cursor to [OK], and then press (ENTER). [Auto off] 18 GB 1Press V to select [Time setting] , (ENTER). 2Press v/V to select the desired period after which you want to turn the photo frame off automatically: 2 hours, 4 hours, or OFF. Then press (ENTER). 4 Press MENU. Changing the settings Press MENU, then B/b to select the (Settings) tab. PNotes · Depending on the status on the photo frame, some settings of some items cannot be changed. They are displayed in gray and cannot be selected. [. . . ] 250 images*5 can be saved. ) Power requirements DC IN jack, DC 5V Power consumption in operation mode at the maximum load normal mode* including the AC adaptor 5. 0 W 4. 8 W * The definition of the normal mode is a status which allows the performance of a slideshow using images stored in the internal memory with the default settings without inserting a memory card or connecting an external device. Operating temperature 5 °C to 35 °C Dimensions [With the stand spread out] Approx. 202 mm × 141 mm × 106. 1 mm (width/height/depth) [When the photo frame is hanging on the wall]: Approx. 202 mm × 141 mm × 26. 5 mm (width/height/depth) Mass Approx. 350 g (excluding the AC adaptor) Included accessories See "Checking included items" on page 6. 24 GB x AC adaptor Power requirements - 100 V to 240 V, 50 Hz/60 Hz 0. 4 A Rated output voltage 5 V 2. 2 A Dimensions Approx. [. . . ]