User manual SONY DPP-FP60BT

[. . . ] The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to this number whenever you call upon your Sony dealer regarding this product. If you have any questions about this product, you may call: Sony's Business Information Center (BIC) at 1800-686-SONY (7669) or Write to: Sony Customer Information Services Center 6900-29 Daniels Parkway, PMB 330 Fort Myerts, Florida 33912 Sony shall assume no responsibility for any accidental or consequential damages or loss of the recording contents which may be caused by use or malfunction of the printer, "Memory Stick" or PC card. [. . . ] To delete a character in the middle of the input box, tap the space after the character you want to delete. The [Insert] button turns orange and the orange cursor appears after the character. (You can also tap [Insert] and then tap the arrows [B/b] to move the cursor after the character you want to delete. ) Then tap [Delete] to delete the character. Each time you tap [Delete], the character before the cursor is deleted. To release insertion mode and place the cursor to the end of the line, tap [Insert]. Enter the remaining characters for the line and then tap [Exit]. Tap on the preview where you want to paste the line of input characters. The line of input characters is pasted onto the preview in a silhouette. To adjust the character size, tap make it smaller. The characters just pasted are erased from the preview. Tap the character input area to display the character input screen. The screen used to adjust the image size, position, angle, and brightness is displayed. A preview reflecting your selections up to the preceding step is displayed. the selected image is displayed in the image area. When you choose a template with multiple images, repeat steps 1 through 4 to select the remaining image(s) for each image area. Check the preview and perform any of the procedures explained in "During or after the Creative Print procedures" on page 45. You can add a selected calendar to an image or images to make an original calendar. The screen used for selecting a calendar template for the selected print paper size is displayed. You can redo the operations from the previous screen. 2 In the "Start Month" line, set the year and month to start the calendar. Tap the month box and tap v/V above and below the month box to set the month. [. . . ] M Make sure that the PC input indicator is not lit. M If the image is displayed but can not be printed, the file used for printing is damaged. M If the mark shown on the right is displayed in the thumbnail list, the image is a JPEG file created with your computer, or the thumbnail data of the image is damaged. If the same mark is displayed again as a preview, the image is stored in an incompatible file format that the DPP-FP60BT does not support or the image itself is damaged. [. . . ]