User manual SONY DPP-FP95

[. . . ] 3-285-420-12 (1) Before you begin Digital Photo Printer DPP-FP85/FP95 Preparations Direct printing Printing from a PictBridge digital camera Printing from a Bluetoothcompliant device Printing from a PC Error messages Operating Instructions Before operating this unit, please read "Read This First" and "About the Print Pack" supplied and this manual, "Operating Instructions, " thoroughly and retain them for future reference. Troubleshooting Owner's Record The model and serial numbers are located on the bottom of the printer. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ________________________ Additional information © 2008 Sony Corporation Please read the supplied "Read This First" and "About the Print Packs. " WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. For the customers purchasing the DPP-FP95 in the U. S. A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] · While the access indicator of the external device is flashing, never turn off the power of the printer or an external device nor remove the external device. The data inside the external device may be damaged. We cannot compensate for any damages that may be caused by data loss or damage. · You cannot use a USB hub or a USB device equipped with a USB hub. · Encoded or compressed data by fingerprint authentication or password cannot be used. 1 Set your digital camera or other external device ready for printing with the Mass Storage-compliant printer. The settings and operations that are necessary before connection differ depending on the external device you use. For details, see the operating instructions of the external device. (In case of Sony Cyber-shot digital camera, for example, select "Normal" mode or "Mass Storage" mode for the "USB Connect. " ) 2 3 4 Connect the printer to the AC power source (page 12). Press the 1 (on/standby) button to turn on the printer. Connect an external device such as a USB memory to the PictBridge/ EXT INTERFACE connector of the printer. Use a USB cable supplied with your digital camera or external device. You can enjoy direct printing. 46 GB Printing from a PictBridge digital camera Printing from a PictBridge digital camera You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera. When printing from a PictBridge/EXT INTERFACE connector, make sure to remove memory card(s), your computer, and a television from the printer in advance. · · · · Index Print DPOF Print Borders/Borderless Print Date Print To PictBridge/EXT INTERFACE connector 1 Set your digital camera ready for printing with a PictBridge-compliant printer. The required settings and operations that must be completed before connection differ depending on the digital camera. For details, see the operating instructions of your digital camera. (In case of a Sony Cyber-shot digital camera, for example, select "PictBridge" mode for the "USB Connect. ") Camera or other PictBridge-complaint device Printing from a PictBridge digital camera To USB connector Notes · If you replace an ink ribbon while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. If this occurs, disconnect and then connect the digital camera. · When printing from a PictBridge-compliant digital camera, an image will be printed according to the settings of the Print setup menu of the printer. When you set the Date Print or Borders/Borderless options with your digital camera, the digital camera settings will have priority. If you select "Borders" with the printer and "Borders" with your camera, "Pattern 1" will be used for printing. · Even when you select "Date/Time" for Date Print setting, time may not be printed according to the digital camera you use. · For error messages displayed on your digital camera, refer to the operating instructions of your digital camera. · You cannot use a USB hub or a digital camera containing a USB hub. 2 3 4 Connect the printer to the AC power source (page 12). Press the 1 (on/standby) button to turn on the printer. Connect the PictBridge-compliant digital camera to the PictBridge/EXT INTERFACE connector of the printer. When you connect a PictBridge-compliant digital camera to the printer, "PictBridge" is displayed on the LCD display of the printer. 5 Operate the digital camera to print an image. The printer supports the following prints: · Single-image print · All images print 47 GB Printing from a Bluetooth-compliant device Printing from a Bluetoothcompliant device By connecting the Sony DPPA-BT1 Bluetooth USB adaptor to the PictBridge/EXT INTERFACE connector of your printer, you can print an image from a Bluetooth-compliant mobile phone, digital camera, or other device. Notes · Do not use the DPPA-BT1 outside the area you purchased it. [. . . ] 137 mm (5 1/2 inches) (excluding a handle) Approx. 149 mm (5 7/8 inches) (including a handle) Depth when the paper tray is installed: Approx. 317 mm (121/2 inches) Mass DPP-FP85: Approx. 1. 2 kg (2 lb 10 oz) (excluding the paper tray, ink ribbon, AC adaptor) Supplied accessories See page 9 of "Operating Instructions" (this booklet) *3 : Print Speed: Time from when the PRINT button is pressed to when printing is finished. [. . . ]