User manual SONY DPP-FPHD1

[. . . ] Before operating this printer, please read this manual thoroughly and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] ­ Total number of print paper does not exceed 20 sheets. ­ Do not print on the used print paper. Printing an image twice on the same paper will not make the printed image thicker. ­ Use the print paper for this printer only. ­ Do not use the print paper ejected without printed. pNote on storing the print paper · Avoid storing the paper with the printed faces touching each other or in contact with rubber or plastic products including vinyl chloride or plasticizer for an extended period of time; color changes or deterioration of the printed image may occur. PNote The socket outlet shall be installed near the equipment and shall be easily accessible. When using the paper protector (supplied) The print paper comes out of the rear side a few times during printing. You can protect the paper ejected from the printer when using the paper protector. When both the Component video cable and the A/V connecting cable are connected, images will be output not via the A/V OUT jack, but via the COMPONENT OUT jack. The printer is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet , even if the printer itself has been turned off. Connect the AC adaptor to an easily accessible wall outlet close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. When you have finished using the AC adaptor, disconnect it from the DC IN 24V jack of the printer. Do not short the DC plug of the AC adaptor with a metallic object, as this may cause malfunction. Do not use the AC adaptor in a narrow space, such as the one between the printer and the wall. For details on how to play back on a TV, see page 17. You can play back images by connecting to the TV with the A/V connecting cable (supplied) or the component video cable (supplied) together with the A/V connecting cable. When connecting with the component video cable, set the "COMPONENT" setting of the camera to "HD(1080i)" beforehand. You can playback a series of still images recorded with your camera by only pressing the SLIDE SHOW button on the remote control. You can change the settings of Slide Show with the settings on the camera. You can print images by pressing either Adaptor and turn on the power of the camera. [. . . ] In such cases the printer will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC power cord of the printer and do not use the printer for at least one hour. Otherwise, this may cause a malfunction. When you transport the printer, remove the ink ribbon, paper tray or AC adaptor, from the printer and put the printer and its peripherals in the original box with the protective packaging. [. . . ]