User manual SONY DPP-M55

[. . . ] ⭠Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TV programs, films, video tapes and other materials may be copyrighted. [. . . ] Power cord (supplied) to the wall outlet First the data transmission indicator starts flashing and then the print paper indicator starts flashing. Insert a sheet of print paper into the paper inlet until less than 13/16 inches (2 cm) of the print paper is left out of the paper inlet. The print paper automatically loaded into the printer. Controllable area is about 4 - 12 inches (10 - 30 cm) in terms of straight line distance and an angle of 15 degrees right or left. notes · Position the infrared ports of both equipment within the controllable area. Do not place them outside the area nor place them too close, which may interrupt transferring or results in noises. ⷠDo not cover the infrared port with your hand or any other objects. ⷠInfrared rays cannot pass through a wall, opaque glass, etc. Keep other infrared devices such as infrared cordless headphones away during printing. ⷠVery bright lighting may cause malfunction. within 4 - 12 inches · Use the camera on the AC power adaptor. When the printer receives the first data from the camera, it sounds a short beep. When the printer receives all data successfully, it sounds a long beep and starts printing. Printing takes about 70 seconds per sheet. notes · Do not move the printer and the camera during printing. ⷠYou may move the printer and the camera after you hear a long beep, except when making several prints. ⷠThe printer will sound intermittent beeps when it cannot receive data properly. To use other functions of the printer, open and read "Readme" file in the supplied CD-ROM. Be careful not to put or drop any heavy objects on the power cord, or to damage the cord in any way. Never operate this printer with a damaged power cord. ⷠShould any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further. ⷠTo disconnect the cord, pull it out by the plug. [. . . ] Turn off the power and remove the jammed paper. Remove the jammed paper from the paper outlet on the rear panel. Remove the jammed paper from the paper inlet on the front panel. Note If the data transmission indicator does not turn on after having removed the jammed paper, turn the power off and on again. [. . . ]