User manual SONY DPS-V55M

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. wARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. Before operating the unit, please read this manual thoroughly and retain it for future reference. [. . . ] 4 Structure symbol: "/" (Parallel) : To use FxA and FxB separately (the illustration shows a parallel structure). "m" (Serial) : To feed the output of FxA into FxB for additional processing. The structure symbols correspond to those printed on the front panel below the display. The effect numbers correspond to those printed on the front panel to the left of the display. This function lets you search for programs based on the type of effects they contain. In addition to being a good way to explore different implementations of the same effect, it is also a quick way locate a specific program. Press Fx TYPE (SEARCH) twice to display the search screen. Only programs containing the selected effect (displayed on the first line) will appear. You can also monitor the sound of these programs. The numbers (01~45) and names of the effects correspond to those printed on the front panel to the left of the display. "Executing" appears momentarily and the unit switches to the selected program (and back to play mode). The number and name of the first program containing the selected effect appear on the bottom line of the display. You can also monitor the sound of this program. Press EDIT PARAMETER / to move the cursor to the bottom line of the display. Use the following operations to choose the effect(s) to be used in your program. You can choose up to two effect blocks (when using 2ch (10~36) or Mono-Pair (37~45) effects). When using a 4ch effect (01~09), you may choose only one effect. The numbers (10~45) correspond to the effects printed on the front panel. The numbers (01~45) correspond to the effects printed on the front panel to the left of the display. To change the structure type before returning to the play mode, press EDIT PARAMETER ?To switch to the structure parameter, then proceed from step 3 of "Choosing the Structure". When you select a 4ch effect (numbers 01~09), press EXIT to return to play mode and skip the following steps. [. . . ] " appears in the display when you turn on the power, the internal memory back-up battery is nearly exhausted. In order to preserve the user memory data, promptly request battery replacement service from the store of purchase or a nearby Sony dealer. User memory data may be reverted to the original factory data when requesting battery replacement. Be sure to save important data using an external MIDI data filer, or by writing down the settings on a piece of paper (etc. [. . . ]