User manual SONY DR-210DP

[. . . ] To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Connect the AC power adaptor to an easily accessible AC outlet. [. . . ] · You may need to press the play/pause button of the Bluetooth receiving device twice when you operate the button on the iPod. · Operation of the iPod with the transmitter by the Bluetooth receiving device will vary depending on the Bluetooth receiving device's specification. · When the iPod is playing a video or photo, remote control operation may become unstable. Tip 0 When you press the pause button on the Bluetooth receiving device, the iPod goes to pause mode for 10 minutes and the iPod backlight is turns on and off at interval. Do not cover the transmitter with hands. Advanced operation Pairing with other Bluetooth devices What is pairing? Bluetooth devices need to be "paired" with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: · Pairing information is deleted after repair, etc. · This product is paired with 9 or more receiving devices. This product can be paired with up to 8 Bluetooth device respectively. If a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. All pairing information is deleted (page 38). Pairing transmitter with other Bluetooth receiving devices 1 2 3 4 Turn on the power of iPod. (Make sure the iPod is in pause mode. ) Connect the transmitter to the iPod (page 16). Place the transmitter and the Bluetooth receiving device to be paired together within 1 m (3 ft). Set the Bluetooth receiving device to enter "Pairing in process. " See the operating instructions supplied with the Bluetooth receiving device. · Passcode* of the transmitter is fixed at "0000, " "1234, " or "8888. " Depending on the Bluetooth receiving device, it may be necessary to input the passcode (in this case, "0000, " "1234, " or "8888"). The transmitter cannot be paired with a Bluetooth receiving device whose passcode is not "0000, " "1234, " or "8888. " · If the Bluetooth receiving device requires a passcode, input "0000. " * Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. " Notes Continued 1 5 Press and hold the power button of the transmitter for about 7 seconds or more to enter "Pairing in process. " After about 1 second, the transmitter indicator will flash twice, but keep pressing the power button. ­ ­ ­ ­. . . (Standby for receiving audio signal) B ­ ­ ­ ­ ­ ­ ­ ­ ­ R B ­ ­ ­ ­ ­ ­ ­ ­ R B . . . ­ R B ­ ­ ­ ­ ­ ­ ­ ­ ­ R B ­ ­ ­ ­ ­ ­ ­ ­ R ­ ­ ­ ­ . . . ­ ­ ­ . . . Listening during standby for telephone call Incoming call Talking Phone ­ ­ ­ ­ . . . ­ ­ ­ . . . Calling while playing back music 6 Re-pairing the transmitter and the headset 1 2 3 4 Turn on the power of iPod. (Make sure the iPod is in pause mode. ) Connect the transmitter to the iPod (page 16). Place the transmitter and the headset to be paired together within 1 m (3 ft). Press and hold the PAIRING button of the headset for about 2 seconds or more to enter "Pairing in process" while the headset is turned off. The headset indicator (red) and the headset indicator (blue) will flash together and the headset enters into pairing mode. 5 Press and hold the power button of the transmitter for about 7 seconds or more to enter "Pairing in process. " After about 1 second, the transmitter indicator will flash twice, but keep pressing the power button. · When first power on the transmitter after initialized, the transmitter will enter "Pairing in process" automatically. · The pairing information is initialized if you press and hold the power button for 15 seconds. The transmitter indicator lights up for 5 seconds before the initialization starts. Release the button immediately when the transmitter indicator lights up. · "Pairing in process" is released after about 5 minutes. If pairing is not established within about 5 minutes, repeat the above procedure from step . [. . . ] Turn up the volume of the headset as high as possible to the extent that sound is not distorted. Turn down the volume of the headset to the point where the sound is no longer distorted. Ensure that this product is not receiving interference from a wireless LAN, other 2. 4 GHz wireless device, or microwave oven. Turn off the EQ of iPod. The headset is not turned on. No sound Low sound level Cannot change the volume. [. . . ]