User manual SONY DR-BT101

[. . . ] 4-130-181-11(1) Wireless Stereo Headset Operating Instructions DR-BT101 ©2009 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] If this unit is turned off while an A2DP Bluetooth connection is established, operate the unit again from step 1 to make the A2DP Bluetooth connection again. * For detail on profiles, see page 6. 1 Press and hold the POWER button for about seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice and the unit turns on. Note After the unit is turned on, the unit attempts to connect to the last connected Bluetooth device automatically with HFP or HSP. When not calling with this unit, do not 16 To adjust the volume Press the VOL+/­ button while listening to music to adjust the volume. Tips Depending on the connected device, it may be necessary to adjust the volume on the connected device as well. Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. Controlling the audio device ­ AVRCP If the Bluetooth audio device connected with this unit supports AVRCP (Audio Video Remote Control Profile), you can control by using the unit buttons. Refer to the operating instructions supplied with the Bluetooth device on how to operate it. Note Operation of the Bluetooth connecting device by this unit will vary depending on its specification. Status: In stop or pause mode To stop use 1 Terminate the Bluetooth connection by operating the Bluetooth device. Press and hold the POWER button for about seconds. The indicator (blue) and indicator (red) light up together, and the unit turns off. Short Press / Long Press Tip When you finish playing music, the Bluetooth connection may terminate automatically, depending on the Bluetooth device. Starts playback*1 Stop Skip to next/previous Fast-forward/Fast-rewind*2 Short Press Long Press Status: In play mode / 1 Pause* Stop Skip to next/previous Fast-forward/Fast-rewind*2 *1 You may need to press the button twice depending on the Bluetooth device. *2 Some Bluetooth devices may not operate. Note You cannot adjust the volume of the Bluetooth device by the unit volume buttons. Continued 17 Tip Depending on the Bluetooth device, the fastforward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about seconds to turn off the unit. Press and hold the POWER button and jog switch () for about 7 seconds. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice. Note You cannot adjust the volume of the Bluetooth device by the unit volume buttons. 18 Calling VOL + button VOL ­ button POWER button When this unit does not connect to a Bluetooth mobile phone automatically You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. Multi function button Check the following before operating the unit. ­ The Bluetooth function is active on the mobile phone. ­ Pairing of this unit and the Bluetooth mobile phone is complete. To make a connection by operating Bluetooth mobile phone 1 Make the Bluetooth connection (HFP or HSP*) from the Bluetooth mobile phone to this unit. Refer to the manual supplied with your Bluetooth mobile phone for operation details. The list of recognized devices appears on the display of the Bluetooth mobile phone. This unit is displayed as "DR-BT101. " When you use the Bluetooth mobile phone features both HFP (Handsfree Profile) and HSP (Headset Profile), set to HFP. Note When connecting to a Bluetooth mobile phone which is different from the last connected one, make the connection following the above procedure. * For details on profiles, see page 6. 1 Press and hold the POWER button for about seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice, the unit turns on and then this unit tries to connect to the last Bluetooth mobile phone that was used. Tip This unit will stop trying to connect to the Bluetooth mobile phone after 1 minute. [. . . ] Pair this unit and Bluetooth device again (page 12). Reception condition of this unit may have become unstable due to improper matching of the bit-rate setting for the music transmitted from the Bluetooth device and the environment in which this unit is used. *1 Terminate A2DP Bluetooth connection by operating the Bluetooth device. While this unit is turned on, press and hold for about 7 seconds to lower the setting of receivable bit rate. *2 *1 Bit rate is a numerical value which represents data transmission volume per second. [. . . ]