User manual SONY DR-BT160IK

[. . . ] 4-108-812-12(1) Wireless Stereo Headset Operating Instructions DR-BT160iK ©2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Release the button immediately when the transmitter indicator lights up. When the transmitter indicator flashes quickly, stop pressing. The transmitter enters "Pairing in process. " The transmitter indicator status will vary as follows, and pairing is established with the Bluetooth receiving device. The transmitter indicator flashes quickly: Pairing in process The transmitter indicator flashes (at about 1-second intervals) when responding to the Bluetooth receiving device: Connectable (Pairing successful) The transmitter indicator flashes (at about 5-second intervals): Connected Notes · "Pairing in process" of the transmitter is released after about 5 minutes. If pairing is not established within about 5 minutes, repeat the above procedure from step . iPod backlight may turn on in this 5 minutes. · To enter "Pairing in process, " you need to turn off the power of the transmitter first. When not completed pairing Repeat the procedure from step . To quit "Pairing in process" Press and hold the power button of the transmitter for about 1 second to turn off the transmitter. Tip When pairing the transmitter with a number of Bluetooth receiving devices, repeat steps to for each device individually. Note For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as the transmitter. However, even if it is corresponding with the same profile, functions may differ depending on the specification of the Bluetooth device. On Transmitter Indicators Status Power on Flashes twice Indicator Power off Flashes once Pairing Flashes quickly . . . Connecting Flashes (at about 1-second intervals) ­ ­ ­ ­ ­. . . Connected Listening *1 (flashes twice at about 5-second intervals) With no music *2 (flashes once at about 5-second intervals) ­­­­­ ­­­­­. . . ­­­­­ ­­­­­. . . Continued *1 When press on the iPod, the music pause. The indicator flashes twice on the transmitter. The transmitter transmit the data of no sound. *2 When press the pause button on the Bluetooth receiving device, the music pause. The indicator flashes once on the transmitter. The transmitter does not transmit the music. Pairing headset with other Bluetooth transmitting devices 1 2 Place the Bluetooth transmitting device to be paired together within 1 m (3 ft) of the headset. Press and hold the PAIRING button of the headset for about 2 seconds or more to enter "Pairing in process" while the headset is turned off. 3 Release the PAIRING button when the headset indicator starts flashing quickly. The headset enters the pairing process. Turning Bluetooth transmitting device to pairing standby mode. See the operating instructions supplied with the Bluetooth transmitting device. The list of detected devices appears on the display of the Bluetooth transmitting device. The headset is displayed as "DR-BT160AS. " This headset indicator status will vary as follows, and pairing is established with the Bluetooth transmitting device. The headset indicator flashes quickly: Pairing in process The headset indicator flashes (at about 1-second intervals) when responding to the Bluetooth transmitting device: Connectable (Pairing successful) The headset indicator flashes (at about 5-second intervals): Connected Note Passcode* of the headset is fixed at "0000. " Depending on the Bluetooth receiving device, it may be necessary to input the passcode (in this case, "0000"). The headset cannot be paired with a Bluetooth receiving device whose passcode is not "0000. " * Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. " When not completed pairing Repeat the procedure from step . To quit "Pairing in process" Press and hold the POWER button of the headset for about 3 seconds to turn off the headset. Note For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as the headset. However, even if it is corresponding with the same profile, the function may differ depending on the specification of the Bluetooth device. Continued On Headset Indicators B : Headset indicator (blue) R : Headset indicator (red) Status Pairing Searching Connectable Connecting Connecting Indicator B ­ R ­ B ­ ­ ­ R B ­ ­ R ­ ­ ­ ­ ­ ­ ­­ ­­ ­­ ­ ­ ­­ ­­ ­­ ­ ­ ­ ­ ­­ ­­ ­­ ­ ­ ­­ ­­ ­­ ­. . . . . . HFP/HSP or A2DP Connected HFP/HSP and A2DP Listening Music (Standby for receiving audio signal) B ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ R B ­ ­ R ­­­­­­­ ­ ­ ­ ­ ­. . . ­ ­ ­ ­. . . (Standby for receiving audio signal) B ­ ­ ­ ­ ­ ­ ­ ­ ­ R B ­ ­ ­ ­ ­ ­ ­ ­ R B . . . ­ R B ­ ­ ­ ­ ­ ­ ­ ­ ­ R B ­ ­ ­ ­ ­ ­ ­ ­ R ­ ­ ­ ­ . . . ­ ­ ­ . . . Listening during standby for telephone call Incoming call Talking Phone ­ ­ ­ ­ . . . [. . . ] Distorted sound 6 Symptom Sound break, noise or playback speed change. Cause / Remedy If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources. Remove any obstacle between the transmitter and the headset or move away from the obstacle. Locate the transmitter and the headset as near as possible. Re-position or re-orient the transmitter and the headset. [. . . ]