User manual SONY DR-BTN200/WHI MARKETING SPECIFICATIONS (WHITE)

[. . . ] -) You can control a connected iPod product. Microphone  English Stereo headset Parts and controls Open circuit voltage level: – 42 dB ( 0 dB=1 V/Pa) WARNING       To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. refer servicing to qualified personnel only. [. . . ] You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Ύ Volume + Increases the volume of the connected iPod product. Ύ Center button Plays/pauses a track of the connected iPod product with a single press. Skips to the next track with a double press. Skips to the previous track with a triple press. Starts the “VoiceOver*” feature with a long press (if available). Hold down for about two seconds to reject an incoming call. When you let go, two low beeps confirm the call was rejected. Ύ Volume – Decreases the volume of the connected iPod product. Ύ Microphone * Availability of the “VoiceOver” feature depends on iPod and its software version. The effect can be minimized by wearing clothes made from natural materials. Optional replacement earbuds can be ordered from your nearest Sony dealer. To check the transparent earbud sizes The transparent earbud sizes are distinguished by a line pattern (see fig. To check the black earbud sizes The black earbud sizes are distinguished by the inside color (see fig. Black earbud sizes (inside color) Small  S (Orange) M (Green) L (Light blue)  Large On copyright Colored parts   iPad , iPhone , iPod , iPod classic , iPod nano , iPod shuffle , and iPod touch are trademarks of Apple Inc. €Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. ® ® ® ® ® ® To detach an earbud (see fig. Ό-) While holding the headset, twist and pull the earbud off. Ά Tip If the earbud slips and cannot be detached, wrap it in a dry soft cloth. [. . . ] Ό-) While holding the headset, twist and pull the earbud off. Ά Tip If the earbud slips and cannot be detached, wrap it in a dry soft cloth. Ό-) Push the parts inside of the earbud into the headset until the projecting part of the headset is fully covered. Cleaning the earbuds Remove the earbuds from the headset, and wash them with a mild detergent solution. [. . . ]