User manual SONY DRIVE S

[. . . ] 4-480-655-13(1) Bluetooth® Audio System Operating Instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing GB DE FR IT NL To cancel the demonstration (DEMO) display, see page 16. MEX-N4000BT Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. Made in Thailand Laser Diode Properties  Emission Duration: Continuous  Laser Output: Less than 53. [. . . ] Activating voice recognition (Android phone only) By registering applications, you can control an application by voice command. For details, refer to the help of the application. To activate voice recognition 1 Press ENTER to activate voice recognition. 15GB Settings Canceling the DEMO Mode You can cancel the demonstration display which appears while this unit is turned off. AUTO OFF Shuts off automatically after a desired time when the unit is turned off: [NO], [30S] (30 seconds), [30M] (30 minutes), [60M] (60 minutes). aUX-A (AUX audio) Activates the AUX source display: [ON] , [OFF]. (Available only when the unit is turned off. ) REAR/SUB Switches the audio output: [SUB-OUT] (subwoofer) , [REAR-OUT](power amplifier). (Available only when the unit is turned off. ) BTM (page 9) 1 2 3 4 Press MENU, rotate the control dial to select [DISPLAY], then press it. Rotate the control dial to select [DEMO], then press it. Rotate the control dial to select [DEMOOFF], then press it. Basic Setting Operation You can set items in the menu to the following procedure. The following items can be set depending on the source and setting. AUDIO+ (clear audio+) Reproduces sound by optimizing the digital signal with the Sony recommended sound settings: [ON], [OFF]. The equalizer curve setting can be memorized for each source. The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB. Rotate the control dial to select the setup category, then press it. Setup categories are follows:  GENERAL setup (page 16)  SOUND setup (page 16)  DISPLAY setup (page 18)  BT (BLUETOOTH) setup (page 18)  APP REM (App Remote) setup (page 18) 3 Rotate the control dial to select the options, then press it. To return to the previous display Press GENERAL Setup CLOCK-ADJ (clock adjust) (page 6) CAUT ALM (caution alarm) (page 6) Activates the caution alarm: [ON], [OFF]. (Available only when the unit is turned off. ) BEEP Activates the beep sound: [ON] , [OFF]. [. . . ] Ώ Access the phonebook in the cellular phone again. MEM FAILURE (memory failure)  This unit failed to store the contact in the preset dial. Ώ Make sure that the number you intend to store is correct (page 13). ΅ BLUETOOTH phone source is selected without a cellular phone connected. [. . . ]