User manual SONY DR-NXM01CK2

[. . . ] 3-245-382-11(1) Digital Audio Receiver Operating Instructions Before operating the unit, install the unit correctly by referring to the Installation Guide. You need to subscribe for XMTM Satellite Radio Service to listen to the radio broadcast. For customers in the USA Please register this product on line at http://www. sony. com/ productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. [. . . ] It is prohibited to copy, decompile, disassemble, reverse engineer or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into humanreadable form. The software is licensed solely for use within this product. 3 Caution · Do not operate the unit in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times. · Do not install the unit where it may obstruct your view through the windshield or your view of your vehicle's indicator displays. · Do not install the unit where it may hinder the function of safety devices such as an air-bag. Doing so may prevent the air-bag from functioning properly in the event of an accident. · The installation and use suggestions contained in this manual are subject to any restrictions or limitations that may be imposed by applicable law-- purchaser should check applicable law for any restrictions or limitations before installing and/or operating this product. · Failure to follow these safety instructions and warnings may result in a serious accident. Remote commander Power requirements: 3V DC, one CR2025 lithium battery Dimensions: Approx. 47 × 125 × 9 mm (w/h/d) (Approx. 1 7/8 × 5 × 3/8 inches) incl. projecting parts and controls Mass: Approx. lithium battery 1 2 3 XM antenna (supplied only for DRN-XM01H2) Frequency:2 332. 5 - 2 345. 0 MHz Input voltage: 4. 7 V DC (3. 6 - 5. 5 V allowable) Current draw:100 mA max. 55 × 31 × 69 mm (w/h/d) (Approx. 2 1/4 × 1 1/4 × 2 3/4 inches) Mass: Approx. 250 g (8. 8 oz) Design and specifications are subject to change without notice. Insert a long and thin object into the hole, then pull out the lithium battery holder. Replace the lithium battery with the positive (+) side facing up. Insert the battery holder into the remote commander until it clicks. (Approx. ) 1 year Features · This unit is exclusively for the XM Satellite radio. · Display function for a variety of text information about the tuned-in channel. · Memo function enables the unit to store the text information for up to 10 memories. [. . . ] Note When the Category list cannot be received depending on the receiving condition, "--------" is displayed in step 3 above, and you cannot select the Channel Category. Tips · When the Additional Information text has more than 16 characters, text will be scrolled every 2 seconds. After all Additional Information is displayed, "--- + --- + --- + --- +" appears for about 2 seconds and then repeats displaying from the beginning. · As the unit memorizes the display mode when the power is turned off, the display appears in the last display mode when you turn on the unit. Note If the channel has no text information, "--------" will appear in the display. Turn JOG roller (or press X / x on the remote) to select setting and press JOG roller (or ENTER on the remote). The setting changes as follows: OFF 60 min 120 min 180 min L L H H Two or more indicators light up. Back Light You can select the lighting level of the display window. [. . . ]